Line 113: Line 113:
=== Value Outreach ===
=== Value Outreach ===


* An option for the Six-SS carillon.
* 200W Amplifier
* [[60W_Amplifier_Module|60W Amplifier module]] built-in to carillon
* Pair of [[Standard_economical_speaker_specification|economy speakers]]
* Pair of [[Standard_economical_speaker_specification|economy speakers]]
** Qty 2 standard horns
** Qty 2 standard horns
Line 124: Line 123:
** Screw Driver
** Screw Driver
* 250 feet AWG 14-2 SJTO wire
* 250 feet AWG 14-2 SJTO wire


[[category: Electronic Carillon Specification]]
[[category: Electronic Carillon Specification]]
[[category: inSpire Specification]]
[[category: inSpire Specification]]

Revision as of 15:36, 26 August 2020


In addition to these packages, we can customize a system for you with:

  • amplifier to connect existing working outdoor speakers
  • replacement drivers for existing horn speakers
  • installation and training
  • directional control
  • sanctuary sound
  • remote amplifier installation
  • control and augmentation of tower bells and chimes
  • tower clocks


inSpire™ Ultimate

  • Qty 2 InSpire amplifiers
    • Qty 1 inSpire DSP 1600W Amplifier
      • Two long throw directions from tower (independent levels) - four horns for each direction
      • Subwoofer upgrade channel (unused)
      • 400W inside monitoring amplifier channel (inside speaker included)
    • Qty 1 inSpire DSP 2500W Amplifier
      • Two full range output directions (independent levels) - two full range speakers for each direction
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 8 * Qty 8 Premium long-throw mid-range horns
    • Qty 8 Premium horn drivers
  • Qty 1 inSpire Sub 12 inch sub-woofer
  • Qty 1 8 inch two way inside monitor speaker

Local Electrician required to install five pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Professional

  • Qty 2 InSpire amplifiers
    • Qty 1 inSpire DSP 1600W Amplifier
      • Two long throw directions from tower (independent levels) - four horns for each direction
      • Future subwoofer upgrade channel (unused)
      • 400W inside monitoring amplifier channel (inside speakers optional)
    • Qty 1 inSpire DSP 2500W Amplifier
      • Two full range output directions (independent levels) - two full range speakers for each direction
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 8 * Qty 8 Premium long-throw mid-range horns
    • Qty 8 Premium horn drivers

Local electrician required to install four (or five for future subwoofer upgrade) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Performance

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker system below
      • Speaker protection programming
  • Four inSpire Twelve full-range horn speakers in tower
    • Two pairs of speakers on each output channel provides directional control
  • Audio cable kit
    • Cables between carillon and amplifier for audio and control signals
    • SJTO pigtails for each speaker

Local electrician required to install two pair of stranded AWG 12 THHN in conduit from amplifier location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Ascent

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 1 inSpire Twelve full-range horn speaker
  • Qty 4 Premium long-throw mid-range horns
    • Qty 4 Premium horn drivers

Local electrician required to install two pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system).

inSpire™ Outreach

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
  • Qty 4 Premium long-throw horns
    • Qty 4 Premium horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 4 SJTO driver
    • Qty 4 Driver wiring pigtails with fork terminals attached
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire

Community Outreach

  • Qty 1 400W Amplifier
    • Audio cable kit
    • Amplifier settings pre-configured
  • Qty 4 Premium long-throw horns
    • Qty 4 Premium horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 4 SJTO driver
    • Qty 4 Driver wiring pigtails with fork terminals attached
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire

Value Outreach

  • 200W Amplifier
  • Pair of economy speakers
    • Qty 2 standard horns
    • Qty 2 standard horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 2 SJTO driver pigtails with fork terminals installed
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire