Using Platinum carillon: Difference between revisions

Line 34:

== Remote control and function buttons ==

The four function selection buttons duplicate the buttons [1] through [4] on the front panel of the Chime Master System Unit. When the system is in the Standby mode, these four buttons allow special

The four function selection buttons duplicate the buttons ''1'' through ''4'' on the front panel of the Chime Master System Unit. When the system is in the Standby mode, these four buttons allow special functions to be played.

functions to be played.

The red ~~[STOP]~~ button on the remote duplicates the ~~[CANCEL]~~ button on the front panel. Whenever the system is playing, pressing stop will cause the selection to be interrupted. If a function with multiple selections is programmed, then the next selection in the sequence may play after the current one is canceled. To cancel all selections, press ~~[CANCEL]~~ at least two times.

The red ''Stop'' button on the remote duplicates the red ''Stop'' button on the front panel. Whenever the system is playing, pressing stop will cause the selection to be interrupted. If a function with multiple selections is programmed, then the next selection in the sequence may play after the current one is canceled. To cancel all selections, press ''Stop'' at least two times.

When a ~~function~~ selection is ready to play, the green ~~[PLAY]~~ button duplicates the action of the ~~[ENTER]~~ button on the front panel.

When a selection is ready to play, the green ''Play'' button duplicates the action of the ''Play'' button on the front panel.

To send a command from the remote transmitter to the Chime Master, simply press the appropriate button. Each time a button is pressed, it should be held for about one second. If the battery

To send a command from the remote transmitter to the Chime Master, simply press the appropriate button. Each time a button is pressed, it should be held for about one second. If the battery condition allows proper transmission, the green battery condition light will illuminate.

condition allows proper transmission, the green battery condition light will illuminate.

~~See above for how to change the function~~ buttons on the ~~remote~~.

The buttons can be re-programmed from the factory functions.

== Management Software ==

@@ Line 34: / Line 34: @@
 == Remote control and function buttons ==
-The four function selection buttons duplicate the buttons [1] through [4] on the front panel of the Chime Master System Unit. When the system is in the Standby mode, these four buttons allow special
+The four function selection buttons duplicate the buttons ''1'' through ''4'' on the front panel of the Chime Master System Unit. When the system is in the Standby mode, these four buttons allow special functions to be played.
-functions to be played.
-The red [STOP] button on the remote duplicates the [CANCEL] button on the front panel. Whenever the system is playing, pressing stop will cause the selection to be interrupted. If a function with multiple selections is programmed, then the next selection in the sequence may play after the current one is canceled. To cancel all selections, press [CANCEL] at least two times.
+The red ''Stop'' button on the remote duplicates the red ''Stop'' button on the front panel. Whenever the system is playing, pressing stop will cause the selection to be interrupted. If a function with multiple selections is programmed, then the next selection in the sequence may play after the current one is canceled. To cancel all selections, press ''Stop'' at least two times.
-When a function selection is ready to play, the green [PLAY] button duplicates the action of the [ENTER] button on the front panel.
+When a selection is ready to play, the green ''Play'' button duplicates the action of the ''Play'' button on the front panel.
-To send a command from the remote transmitter to the Chime Master, simply press the appropriate button. Each time a button is pressed, it should be held for about one second. If the battery
+To send a command from the remote transmitter to the Chime Master, simply press the appropriate button. Each time a button is pressed, it should be held for about one second. If the battery condition allows proper transmission, the green battery condition light will illuminate.
-condition allows proper transmission, the green battery condition light will illuminate.
-See above for how to change the function buttons on the remote.
+The buttons can be re-programmed from the factory functions.
 == Management Software ==