Sound Packages: Difference between revisions

Revision as of 14:57, 5 August 2019

Home > Help > Specifications

inSpire™ brochure PDF download

In addition to these packages, we can customize a system for you with:

amplifier to connect existing working outdoor speakers
replacement drivers for existing horn speakers
installation and training
directional control
sanctuary sound
remote amplifier installation
control and augmentation of tower bells and chimes
tower clocks

inSpire™ Ultimate

Qty 2 InSpire amplifiers
- Qty 1 inSpire DSP 1600W Amplifier
  - Two long throw directions from tower (independent levels) - four horns for each direction
  - Subwoofer upgrade channel (unused)
  - 400W inside monitoring amplifier channel (inside speaker included)
- Qty 1 inSpire DSP 2500W Amplifier
  - Two full range output directions (independent levels) - two full range speakers for each direction
- Custom engineered for each installation (tower survey not included)
  - Voicing for speaker combination below
  - Speaker protection programming
  - Time alignment compensation for speaker air columns and mounting position
Qty 4 inSpire Twelve full-range horn speakers
Qty 8 * Qty 8 Premium long-throw mid-range horns
- Qty 8 Premium horn drivers
Qty 1 inSpire Sub 12 inch sub-woofer
Qty 1 8 inch two way inside monitor speaker

Local Electrician required to install five pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Professional

Qty 2 InSpire amplifiers
- Qty 1 inSpire DSP 1600W Amplifier
  - Two long throw directions from tower (independent levels) - four horns for each direction
  - Future subwoofer upgrade channel (unused)
  - 400W inside monitoring amplifier channel (inside speakers optional)
- Qty 1 inSpire DSP 2500W Amplifier
  - Two full range output directions (independent levels) - two full range speakers for each direction
- Custom engineered for each installation (tower survey not included)
  - Voicing for speaker combination below
  - Speaker protection programming
  - Time alignment compensation for speaker air columns and mounting position
Qty 4 inSpire Twelve full-range horn speakers
Qty 8 * Qty 8 Premium long-throw mid-range horns
- Qty 8 Premium horn drivers

Local electrician required to install four (or five for future subwoofer upgrade) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Premium

Qty 1 inSpire DSP 2500W Amplifier
- Custom engineered for each installation (tower survey not included)
  - Voicing for speaker combination below
  - Speaker protection programming
  - Time alignment compensation for speaker air columns and mounting position
Qty 4 inSpire Twelve full-range horn speakers
Qty 4 Premium long-throw mid-range horns
- Qty 4 Premium horn drivers

Local electrician required to install two pair of AWG 12 THHN (if longer than 100 ft, larger wire may be required for full range) in conduit from amplifier location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Performance

Four inSpire Twelve full-range horn speakers in tower

inSpire Performance 1600
- Qty 1 inSpire DSP 1600W Amplifier
- Two pair of speakers connected to one dual bridged 70V 800W output
- Allows individual level control to two directions
- No inside speaker output

inSpire Performance 2500
- Qty 1 inSpire DSP 2500W Amplifier
- All four tower speakers paralleled to a single pair wires run a short distance
- All four paralleled to single 2-Ohm 1875W output (three paralleled output channels)
- Inside speaker output D for up to 625W 70V (multi-drop for inside speakers with individual power settings)
Audio cable kit
- Cables between carillon and amplifier for audio and control signals
- SJTO pigtails for each speaker
Amplifier settings pre-configured
Qty 4 inSpire Twelve full-range horn speakers

Local electrician required to install single short distance (Performance 2500) or dual (Performance 1600) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Additionally optional inside wiring to optional inside speaker location(s) (Performance 2500). This system is not available for rooftop mounting.

inSpire™ Ascent

Qty 1 inSpire DSP 1600W Amplifier
- Custom engineered for each installation (tower survey not included)
  - Voicing for speaker combination below
  - Speaker protection programming
  - Time alignment compensation for speaker air columns and mounting position
Qty 1 inSpire Twelve full-range horn speaker
Qty 4 Premium long-throw mid-range horns
- Qty 4 Premium horn drivers

Local electrician required to install two pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system).

inSpire™ Outreach

Qty 1 inSpire DSP 1600W Amplifier
- Custom engineered for each installation (tower survey not included)
  - Voicing for speaker combination below
  - Speaker protection programming
Qty 4 Premium long-throw horns
- Qty 4 Premium horn drivers
Installation kit (does not include optional roof peak speaker bracket)
- Qty 1 Junction box and cover
- Qty 4 SJTO driver
- Qty 4 Driver wiring pigtails with fork terminals attached
- Brass set-screw wire nut kit
- Screw Driver
250 feet AWG 14-2 SJTO wire

Community Outreach

Qty 1 370W Amplifier
- Audio cable kit
- Amplifier settings pre-configured
Qty 4 Premium long-throw horns
- Qty 4 Premium horn drivers
Installation kit (does not include optional roof peak speaker bracket)
- Qty 1 Junction box and cover
- Qty 4 SJTO driver
- Qty 4 Driver wiring pigtails with fork terminals attached
- Brass set-screw wire nut kit
- Screw Driver
250 feet AWG 14-2 SJTO wire

Value Outreach

An option for the Six-SS carillon.
60W Amplifier module built-in to carillon
Pair of economy speakers
- Qty 2 standard horns
- Qty 2 standard horn drivers
Installation kit (does not include optional roof peak speaker bracket)
- Qty 1 Junction box and cover
- Qty 2 SJTO driver pigtails with fork terminals installed
- Brass set-screw wire nut kit
- Screw Driver
250 feet AWG 14-2 SJTO wire

@@ Line 72: / Line 72: @@
 * inSpire Performance 1600
 ** Qty 1 [[InSpire_Amplifier#inSpire_1600|inSpire DSP 1600W]] Amplifier
-** Each speaker connected to a dual bridged 70V 800W output
+** Two pair of speakers connected to one dual bridged 70V 800W output
 ** Allows individual level control to two directions
 ** No inside speaker output