IntelliSwing 2052 motor installation: Difference between revisions
| Line 42: | Line 42: | ||
=== Optical rotation sensing === | === Optical rotation sensing === | ||
Two reflective optical sensors 'watch' the painted disk rotate. They are located so that rotation counts and direction can be detected. There should be approximately 1/8 inch of clearance between the wheel and the sensors. Early motors have press on plastic disks. Later motors have metal disks with set screws that provide more reliable feedback, and can be ordered from us for field update. | Two reflective optical sensors 'watch' the painted disk rotate. They are located on the back of the control PCB so that RPM, rotation counts and direction of rotation can be detected. There should be approximately 1/8 inch of clearance between the wheel and the sensors. Early motors have press on plastic disks. Later motors have metal disks with set screws that provide more reliable feedback, and can be ordered from us for field update. | ||
== Troubleshooting == | == Troubleshooting == | ||