Time Strike AX: Difference between revisions

Line 6:

== Revision 1.2 ==

[[File:TimeStrike_AX1.2.jpg|frameless|right|600px]]

~~This~~ screen ~~provides a view of~~ the current schedule and ~~settings~~. If all days have the same schedule, the All button will ~~be selected~~. ~~Active hours~~ will ~~be green~~. Select active quarters and ringing style ~~using~~ the ~~round buttons~~ at ~~bottom left~~.

Each time you enter this screen, the current time strike schedule will be displayed. Green hours will sound and gray hours are quiet. If a time strike schedule has not yet been defined, the ALL tab will be selected and no hours will be turned on.

When you are finished making changes, tap Save to Schedule. You may exit this screen without saving changes by tapping the home button.

=== Schedule ===

When the ALL tab is selected, you can create one ringing schedule for all seven days. To make a unique schedule, choose that specific day. Once there is a difference between days, ALL cannot be selected until all days are cleared again. If most of your days have the same or similar ringing schedules, it's best to schedule ALL first, then edit any day as necessary.

You may tap any hour to select or deselect. Use the red 9a to 9p button to specifically select or deselect this block of time. The red All/Clear button will select or deselect all 24 hours.

Note: The last hour and any hour followed by a quiet hour, will play the top of the hour only and no following quarters.

=== Select Quarters ===

Once you have set your ringing schedule, you can move on to how you want your quarter hours to sound. Tapping the Quarters button cycles through the following selections:

;Top Only

: Rings the top of the hour only

;Top and Half

: Adds the half hour between consecutive active hours

;Full Quarters

: Adds all four quarter hours between consecutive active hours

When hours are turned off in the middle of the ringing schedule, the last enabled hour will ring at the top, the next enabled hour will ring at the top, and no quarters will ring in between.

=== Select Style ===

Choose how you want the bells to sound by tapping the Top Style and Other Quarters Style buttons to select the ringing style. The other quarters button is available only when the half-hour or full selection is made on the Quarters button.

;Melody (musical note icon)

:Will play the selected chime melody before tolling the top of the hour

:Will play the selected chime melody instead of a single toll on other quarters

;Toll (hammer icon)

:Will toll the number of the hour at the top

:Will toll one time on other quarters

If you selected Melody, select your Time Strike Melody. The default option, Westminster Clock Chime, is most common. Twelve other options are supplied with the system at this time. If you have recorded your own custom clock chime it will appear in the list. For information on naming your own melody, see Custom clock chime melodies section below.

== Revision 1.1 ==

@@ Line 6: / Line 6: @@
 == Revision 1.2 ==
 [[File:TimeStrike_AX1.2.jpg|frameless|right|600px]]
-This screen provides a view of the current schedule and settings. If all days have the same schedule, the All button will be selected. Active hours will be green. Select active quarters and ringing style using the round buttons at bottom left.
+Each time you enter this screen, the current time strike schedule will be displayed. Green hours will sound and gray hours are quiet. If a time strike schedule has not yet been defined, the ALL tab will be selected and no hours will be turned on.
+When you are finished making changes, tap Save to Schedule. You may exit this screen without saving changes by tapping the home button.
+=== Schedule ===
+When the ALL tab is selected, you can create one ringing schedule for all seven days. To make a unique schedule, choose that specific day. Once there is a difference between days, ALL cannot be selected until all days are cleared again. If most of your days have the same or similar ringing schedules, it's best to schedule ALL first, then edit any day as necessary.
+You may tap any hour to select or deselect. Use the red 9a to 9p button to specifically select or deselect this block of time. The red All/Clear button will select or deselect all 24 hours.
+Note: The last hour and any hour followed by a quiet hour, will play the top of the hour only and no following quarters.
+=== Select Quarters ===
+Once you have set your ringing schedule, you can move on to how you want your quarter hours to sound. Tapping the Quarters button cycles through the following selections:
+;Top Only
+: Rings the top of the hour only
+;Top and Half
+: Adds the half hour between consecutive active hours
+;Full Quarters
+: Adds all four quarter hours between consecutive active hours
+When hours are turned off in the middle of the ringing schedule, the last enabled hour will ring at the top, the next enabled hour will ring at the top, and no quarters will ring in between.
+=== Select Style ===
+Choose how you want the bells to sound by tapping the Top Style and Other Quarters Style buttons to select the ringing style. The other quarters button is available only when the half-hour or full selection is made on the Quarters button.
+;Melody (musical note icon)
+:Will play the selected chime melody before tolling the top of the hour
+:Will play the selected chime melody instead of a single toll on other quarters
+;Toll (hammer icon)
+:Will toll the number of the hour at the top
+:Will toll one time on other quarters
+If you selected Melody, select your Time Strike Melody. The default option, Westminster Clock Chime, is most common. Twelve other options are supplied with the system at this time. If you have recorded your own custom clock chime it will appear in the list. For information on naming your own melody, see Custom clock chime melodies section below.
 == Revision 1.1 ==