Rear panel AX: Difference between revisions

Latest revision as of 14:47, 26 May 2023

Help ← Back to Manual Contents

Professional balanced line audio outputs
- IMPORTANT: No horn protection on any outputs, inSpire DSP amplifiers or high-pass filter required for horn type loudspeakers
- OUT A - Outside zone
- OUT B - Outside zone (optional directional control)
- MON 1 - Left inside zone for PA or amplified speaker
- MON 2 - Right inside zone
MIDI keyboard Input
- Keyboard performance recording
- Standard MIDI jack on rear panel
  - Supports two channels (2nd keyboard dedicated to harp-bell instruments)
- USB connection will accept a USB controller or MIDI interface
Amplifier control supports 2 inSpire amplifiers with fault detection
LAN - Wired Ethernet network interface (wired or wireless - WiFi adapter included)
Optional wired or optical tower control bells/clock interface
AC Input 100-240 VAC 50/60 Hz.
- Ground required for surge suppression.
- Uninterruptible power supply (UPS battery backup) is recommended
  - 400VA - Do not plug amplifier into battery backup receptacle, only surge protection

Professional balanced line audio outputs
- OUT A - Inside zone for PA or amplified speaker
- OUT B - Outside zone with horn protection for outdoor speakers
MIDI keyboard Input
- Keyboard performance recording
- Standard MIDI jack on rear panel
  - Single MIDI channel support (carillon or split on one keyboard)
- USB connection will accept a USB MIDI keyboard
Amplifier control for a single inSpire amplifier
LAN - Wired Ethernet network interface (optional WiFi available separately)
Optional wired or optical tower control bells/clock interface
AC Input 100-240 VAC 50/60 Hz.
- Ground required for surge suppression.
- Uninterruptible power supply (UPS battery backup) is recommended
  - 400VA - Do not plug amplifier into battery backup receptacle, only surge protection

Professional balanced line audio outputs
- OUT A - Inside zone for PA or amplified speaker
- OUT B - Outside zone with horn protection for outdoor speakers
LAN - Wired Ethernet network interface
USB - for optional WiFi adapter only
AC Input 100-240 VAC 50/60 Hz.
- Ground required for surge suppression.
- Uninterruptible power supply (UPS battery backup) is recommended
  - 400VA - Do not plug amplifier into battery backup receptacle, only surge protection

The low power requirements of the carillon system allows the use of an affordable uninterruptable power supply.

Suggested UPS

@@ Line 23: / Line 23: @@
 ** Ground required for surge suppression.
 ** Uninterruptible power supply (UPS battery backup) is recommended
+*** 400VA - Do not plug amplifier into battery backup receptacle, only surge protection
 == Millennium ==
@@ Line 42: / Line 43: @@
 ** Ground required for surge suppression.
 ** Uninterruptible power supply (UPS battery backup) is recommended
+*** 400VA - Do not plug amplifier into battery backup receptacle, only surge protection
 == Bravo ==
@@ Line 55: / Line 57: @@
 ** Ground required for surge suppression.
 ** Uninterruptible power supply (UPS battery backup) is recommended
+*** 400VA - Do not plug amplifier into battery backup receptacle, only surge protection
+== Surge Protection ==
+The low power requirements of the carillon system allows the use of an affordable uninterruptable power supply.
+* Grounded power receptacles are required
+* Separate SURGE ONLY receptacles should be used for amplifiers
+* Back up receptacles should only be used for the carillon ringing controller
+Suggested UPS
+* [https://tripplite.eaton.com/bc-personal-120v-350va-180w-standby-ups-ultra-compact-desktop-6-outlets~BC350 Tripp Lite BC350] around [https://www.amazon.com/Tripp-Lite-BC350-Desktop-Battery/dp/B000B8MFI6 $60]
 [[Category:AX Products]]
 [[Category:AX Manual]]