Tower performance menu: Difference between revisions

Latest revision as of 16:45, 5 October 2023

Home > Help > Operating manuals > Previous Generation > 22 Series

Inside and outside performance

Opening the menu

Open the Tower Performance menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display. Press any gray cursor button until the flashing lower line reads Tower Performance then press the Enter button again.

Notice that the green Outside light is on, indicating that the tower speakers are on and your performance will be broadcast outside.

Something similar to the following screen will appear. Your pre-programmed function buttons 1 to 3 (or F1 to F3 on the remote control) are available for immediate performance.

Voicing Pref Split
Swng Peal Toll Voice

Navigating the menu

Press F4 on the remote or carillon to cycle through available voices on your carillon. The system will remember the last voice you selected for the keyboard.

Exiting the performance

When you are finished you may end the performance by pressing the red Cancel button until you see the current date and time on the display. Or manually play a pre-programmed function (F1-F3). The system will cancel itself an hour after the last note has been played.

Inside only performance

Opening the menu

Open the Record menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display. Press any gray cursor button until the flashing lower line reads Record a Performance then press the Enter button again. Notice that the green Outside light is off, indicating that the tower speakers are not on. The current voice selection will be displayed across the top line. Remote function buttons 1-3 control the record menu functions.

Something similar to the following screen will appear.

Concert Chime & Harp
Recd Play Save Voice

Selecting keyboard bell voices

Pressing 4 on the front panel (F4) will cycle through the available bell voices. The last voice selected will be remembered. Platinum systems can be programmed to simplify this list of voices using the Voice Preference Setup screen.

Exiting keyboard mode

When you are finished you may end the performance by pressing the red Cancel button until you see the current date and time on the display. The system will cancel itself an hour after the last note has been played.

Also see

Inside only performance and recording menu
Keyboard setup
- Limit or expand keyboard voices
- Tune the keyboard chimes to your organ
- Change the dynamic response of the keyboard
- MIDI setup wizard to set the carillon to respond to your keyboard
Troubleshooting
- Keyboard volume is low
- Keyboard not responding

@@ Line 1: / Line 1: @@
-==inside and outside performance==
+<div style="font-size:84%">'''[http://www.ChimeMaster.com Home] > [[Chime_Master_Help|Help]] > [[Operating manuals]] > [[:Category:Legacy_Products|Previous Generation]] > [[Using_Millennium_carillon|22 Series]]'''</div>
+== Inside and outside performance ==
 === Opening the menu ===
@@ Line 17: / Line 19: @@
 Press '''F4''' on the remote or carillon to cycle through available voices on your carillon.  The system will remember the last voice you selected for the keyboard.
-===exiting the performance===
+=== Exiting the performance ===
 When you are finished you may end the performance by pressing the red ''Cancel'' button until you see the current date and time on the display.  Or manually play a pre-programmed function (F1-F3). The system will cancel itself an hour after the last note has been played.
-==inside only performance==
+== Inside only performance==
 === Opening the menu ===
 Open the Record menu by pressing the front panel green ''Enter'' button so that you read ''Main Menu'' on the top line of the display. Press any gray cursor button until the flashing lower line reads ''Record a Performance'' then press the ''Enter'' button again.
@@ Line 30: / Line 32: @@
   Recd Play Save Voice
-===selecting keyboard bell voices===
+===Selecting keyboard bell voices===
-Pressing '''4''' on the front panel ('''F4''') will cycle through the available bell voices.  The last voice selected will be remembered.
+Pressing '''4''' on the front panel ('''F4''') will cycle through the available [[Keyboard_Voices|bell voices]].  The last voice selected will be remembered.
-Platinum systems can be programmed to simplify this list of voices using the '''Voice Preference Setup''' screen.
+Platinum systems can be programmed to simplify this list of voices using the [[Voicing_preferences_setup_menu#Options|Voice Preference Setup]] screen.
-==exiting Keyboard mode ===
+=== Exiting keyboard mode ===
 When you are finished you may end the performance by pressing the red ''Cancel'' button until you see the current date and time on the display.  The system will cancel itself an hour after the last note has been played.
-[[category:manual]]
+== Also see ==
+* [[Record_performance_menu|Inside only performance]] and recording menu
+* Keyboard setup
+** [[Voicing_preferences_setup_menu|Limit or expand keyboard voices]]
+** [[Chime_tuning_setup_menu|Tune the keyboard chimes to your organ]]
+** [[Keyboard_sensitivity_setup_menu|Change the dynamic response of the keyboard]]
+** [[Keyboard_size_and_MIDI_setup_menu|MIDI setup wizard]] to set the carillon to respond to your keyboard
+* Troubleshooting
+** [[Keyboard volume is low]]
+** [[Keyboard_DST_fix|Keyboard not responding]]
+[[category:Legacy_Products]]