Bell Control Technical Data 3700: Difference between revisions

Line 198:

** The voltage drop should be around 0.5 Volts - shorted outputs will be near 0 Volts (and fuse will be blown - do not replace)

** Return the module to Chime Master for replacement/rework if any measurement is less than 0.35 Volts

== Other applications ==

=== Minute impulse clocks ===

This application requires a quad relay module with dry contacts to switch the voltage to the clock movements. Standard firmware supports minute impulse.

* set all three Panel address switches ON

* set high baud ON for AX, OFF for LX

* output 1 is odd minutes

* output 2 is even minutes

=== Deagan Damper relay ===

This relay panel supports up to 32 Damper outputs to be used in conjunction with a striker panel for single tone or harmonic Deagan Tower Chimes. We have improved upon Deagan's model 72-74 mechanical relays in conjunction with our Libertas AX controller.

* Harmonic bells supported with a sustain pedal that works like a piano during chord changes

* Single tone (melody only) playing never requires sustain pedaling or legato keying

This application requires DAMPER firware installed on the interface module.

* set all three Panel address switches OFF

* set map switch 4 ON

* set high baud ON (only available with AX controller)

== Repairs ==

@@ Line 198: / Line 198: @@
 ** The voltage drop should be around 0.5 Volts - shorted outputs will be near 0 Volts (and fuse will be blown - do not replace)
 ** Return the module to Chime Master for replacement/rework if any measurement is less than 0.35 Volts
+== Other applications ==
+=== Minute impulse clocks ===
+This application requires a quad relay module with dry contacts to switch the voltage to the clock movements. Standard firmware supports minute impulse.
+* set all three Panel address switches ON
+* set high baud ON for AX, OFF for LX
+* output 1 is odd minutes
+* output 2 is even minutes
+=== Deagan Damper relay ===
+This relay panel supports up to 32 Damper outputs to be used in conjunction with a striker panel for single tone or harmonic Deagan Tower Chimes. We have improved upon Deagan's model 72-74 mechanical relays in conjunction with our Libertas AX controller.
+* Harmonic bells supported with a sustain pedal that works like a piano during chord changes
+* Single tone (melody only) playing never requires sustain pedaling or legato keying
+This application requires DAMPER firware installed on the interface module.
+* set all three Panel address switches OFF
+* set map switch 4 ON
+* set high baud ON (only available with AX controller)
 == Repairs ==