MagForce motor system installation: Difference between revisions
| Line 129: | Line 129: | ||
'''Problems''' | '''Problems''' | ||
* If the bell isn't swinging high enough to ring, but the controller stops sending impulses to the motor during CalcImp, then increase Angle. | * If the bell isn't swinging high enough to ring, but the controller stops sending impulses to the motor during CalcImp, then increase Angle. | ||
* If the bell | * If the bell swings too high on the first pulse, reduce power in the %Start and/or PowerStaSwi parameters. | ||
* If the bell seems to be fighting itself to get started, experiment with smaller values of %Start. | * If the bell seems to be fighting itself to get started, experiment with smaller values of %Start (length of start pulse). | ||
* If you get ''ErrBlo'' (blocked bell): | * If you get ''ErrBlo'' (blocked bell): | ||
** It may need more starting pulses to exit the sensor. Try increasing StaImp (number of allowed blind pulses). | ** It may need more starting pulses to exit the sensor. Try increasing StaImp (number of allowed blind pulses). | ||