IntelliSwing rotary sensor setup: Difference between revisions
| Line 74: | Line 74: | ||
* If the bell kicks too high on the first pulse, reduce power in the %Start (first) and PowerStaSwi (second if you still have too much power) parameters. | * If the bell kicks too high on the first pulse, reduce power in the %Start (first) and PowerStaSwi (second if you still have too much power) parameters. | ||
* If the bell seems to be fighting itself to get started, change Polarity to - (negative). You can reverse two of the motor wires instead of changing polarity in the program if you want the bell to initially swing the other direction. | * If the bell seems to be fighting itself to get started, change Polarity to - (negative). You can reverse two of the motor wires instead of changing polarity in the program if you want the bell to initially swing the other direction. | ||
* If you get ''ErrBlo'' (blocked bell), double check the sensor hookup and operation. Double check | * If you get ''ErrBlo'' (blocked bell), double check the sensor hookup and operation. Double check all motor current connections for integrity (the most common point of failure). | ||
all motor current connections for integrity (the most common point of failure). | |||
* When ''Swing'' appears on the display, the system has calculated the ideal impulse (middle value | * When ''Swing'' appears on the display, the system has calculated the ideal impulse (middle value | ||
on the lower line on the status screen) to swing the bell. If you would like the bell to swing higher or lower, try other values for Angle and MaxAmpli. It will recalculate the ideal impulse based on changes you make at this time. | on the lower line on the status screen) to swing the bell. If you would like the bell to swing higher or lower, try other values for Angle and MaxAmpli. It will recalculate the ideal impulse based on changes you make at this time. | ||