No sound: Difference between revisions

Revision as of 19:00, 2 November 2018 view source Daveallen (talk \| contribs) Interface administrators 4,055 edits No edit summary ← Older edit		Revision as of 19:02, 2 November 2018 view source Daveallen (talk \| contribs) Interface administrators 4,055 edits No edit summary Newer edit →
Line 1:		Line 1:
	==Testing Speakers==		Testing Speakers

	It is crucial to determine which model of audio drivers are being tested. Then, disconnect the outside speakers from the two terminals on the back of the amplifier. Put a DC ohm meter across the terminals. If the reading is higher than the listed value, then one or more of the drivers could be open, or a connection is corroded. If lower, one or more drivers or the wiring may be shorted.		It is crucial to determine which model of audio drivers are being tested. Then, disconnect the outside speakers from the two terminals on the back of the amplifier. Put a DC ohm meter across the terminals. If the reading is higher than the listed value, then one or more of the drivers could be open, or a connection is corroded. If lower, one or more drivers or the wiring may be shorted.