IntelliSwing rotary sensor setup: Difference between revisions
consistency of style - italic for display prompt - bold for buttons |
6.27777 = 6.28 |
||
| Line 43: | Line 43: | ||
Check operation of the sensor. Move the bell by hand and you should hear the phase reversing relay click when the bell reverses direction. | Check operation of the sensor. Move the bell by hand and you should hear the phase reversing relay click when the bell reverses direction. | ||
Chime Master calculates '''Transmission''' for you if we have an accurate survey of the bell prior to system shipment. You can also figure this value for yourself. With standard 1/2 inch chain pitch, multiply the diameter of the wheel (at the point where the chain runs) by 6. | Chime Master calculates '''Transmission''' for you if we have an accurate survey of the bell prior to system shipment. You can also figure this value for yourself. With standard 1/2 inch chain pitch, multiply the diameter of the wheel (at the point where the chain runs) by 6.28, and divide the result by the number of teeth on the motor sprocket. | ||
=== Set Swing Angle and other initial parameters === | === Set Swing Angle and other initial parameters === | ||