Connect Standard Amplifier: Difference between revisions

(2 intermediate revisions by one other user not shown)

Line 1:

=~~= Hookup Standard Amplifier ==~~

<div style="font-size:84%">'''[http://www.ChimeMaster.com Home] > [[Chime_Master_Help|Help]] > [[Installation_documentation|Installation]] '''</div><br />

* Download the illustrated PDF quick start guide - [[Media:Carillon_StdAmp_HookUp.pdf|Hookup carillon to standard amplifier]]

Line 17:

Line 16:

The configuration switch is normally set so that the amplifier drives a single pair of wires to the tower speakers in bridged mode (amplifier in single channel mono mode with double the voltage output). All switches are positioned to the left except for 1, 6, 7 and 10.

=== Speaker connection ===

=== Speaker line connection ===

The six terminal speaker connector can be removed with the supplied screw driver if it has not been packed separately. Connect the pair of wires from the tower to the middle two terminals. Plug the terminal back into the amplifier and tighten the two screws to secure it.

Line 40:

Line 39:

While making small clockwise adjustments, listen outside to be sure that the sound is clear and undistorted. If you hear distorted sound turn the level control counter-clockwise until it clears up again.

Additional level settings can be set in the weekly schedule. The default level is ''6'' and can be set from ''1'' to ''8''.

=== Secure the level controls ===

@@ Line 1: / Line 1: @@
-== Hookup Standard Amplifier ==
+<div style="font-size:84%">'''[http://www.ChimeMaster.com Home] > [[Chime_Master_Help|Help]] > [[Installation_documentation|Installation]] '''</div><br />
 * Download the illustrated PDF quick start guide - [[Media:Carillon_StdAmp_HookUp.pdf|Hookup carillon to standard amplifier]]
@@ Line 17: / Line 16: @@
 The configuration switch is normally set so that the amplifier drives a single pair of wires to the tower speakers in bridged mode (amplifier in single channel mono mode with double the voltage output). All switches are positioned to the left except for 1, 6, 7 and 10.
-=== Speaker connection ===
+=== Speaker line connection ===
 The six terminal speaker connector can be removed with the supplied screw driver if it has not been packed separately. Connect the pair of wires from the tower to the middle two terminals. Plug the terminal back into the amplifier and tighten the two screws to secure it.
@@ Line 40: / Line 39: @@
 While making small clockwise adjustments, listen outside to be sure that the sound is clear and undistorted. If you hear distorted sound turn the level control counter-clockwise until it clears up again.
+Additional level settings can be set in the weekly schedule. The default level is ''6'' and can be set from ''1'' to ''8''.
 === Secure the level controls ===