Connect Internal Amplifier: Difference between revisions

(2 intermediate revisions by one other user not shown)

Line 1:

<div style="font-size:84%">'''[http://www.ChimeMaster.com Home] > [[Chime_Master_Help|Help]] > [[Installation_documentation|Installation]] '''</div><br />

* Download the illustrated PDF [[Media:InternalAmpHookup.pdf|instruction sheet]]

~~== Hookup internal tower amplifier ==~~

Carillons are optionally provided with a built-in 60 Watt (into 8 Ohm load) amplifier. If the part number label's second digit is ''1'' then the amplifier is internally wired for inside monitoring. In this case, the front panel cursor up and down buttons will control the level of the speaker output.

Line 13:

Line 12:

=== Speaker line connection ===

Turn the red and black binding posts ~~left~~ to loosen them for attaching the wire directly. If the wire does not fit through the holes in the posts as shown, it can be wrapped around the post before tightening the bindings.

Turn the red and black binding posts counter-clockwise to loosen them for attaching the wire directly. If the wire does not fit through the holes in the posts as shown, it can be wrapped around the post before re-tightening the bindings.

Newer systems are shipped with a dual banana plug and screwdriver in the installation kit. Use the screwdriver to loosen the set screw through the hole in the rear of the plug and insert the wire into the hole in the side of the plug before re-tightening the set screw. Insert the banana plug into the red and black binding post concentric holes.

@@ Line 1: / Line 1: @@
+<div style="font-size:84%">'''[http://www.ChimeMaster.com Home] > [[Chime_Master_Help|Help]] > [[Installation_documentation|Installation]] '''</div><br />
 * Download the illustrated PDF [[Media:InternalAmpHookup.pdf|instruction sheet]]
-== Hookup internal tower amplifier ==
 Carillons are optionally provided with a built-in 60 Watt (into 8 Ohm load) amplifier. If the part number label's second digit is ''1'' then the amplifier is internally wired for inside monitoring. In this case, the front panel cursor up and down buttons will control the level of the speaker output.
@@ Line 13: / Line 12: @@
 === Speaker line connection ===
-Turn the red and black binding posts left to loosen them for attaching the wire directly. If the wire does not fit through the holes in the posts as shown, it can be wrapped around the post before tightening the bindings.
+Turn the red and black binding posts counter-clockwise to loosen them for attaching the wire directly. If the wire does not fit through the holes in the posts as shown, it can be wrapped around the post before re-tightening the bindings.
 Newer systems are shipped with a dual banana plug and screwdriver in the installation kit. Use the screwdriver to loosen the set screw through the hole in the rear of the plug and insert the wire into the hole in the side of the plug before re-tightening the set screw. Insert the banana plug into the red and black binding post concentric holes.