Changes

Jump to: navigation, search

No sound

327 bytes added, 20:28, 2 November 2018
no edit summary
[[File:PD60Drivers.jpg|400px|PD60 Drivers]]
*Single functional PD60 driver will read 9.5 - 10 ohms directly from the taps on the driver, not including any wire
*Four PD60 drivers will read 2.5 ohms when tied wired together in parallel with a short length of wire*Two PD60 drivers together will read 5 ohms when tied wired together in parallel with a short length of wire
*Four PD60 drivers wired into a speaker line roughly 250ft. in length will read 1.4 ohms
*Four PD60 drivers wired into a speaker line that is 25ft. will read .14 ohms
==SD60 drivers==
[[File:SD60Drivers.jpg|400px|SD60 Drivers]]
*Single functional SD60 driver will read 9.5 - 10 ohmsdirectly from the taps on the driver, not including any wire*Four SD60 drivers will read 2.5 ohmswhen wired together in parallel with a short length of wire*Two SD60 drivers together will read 5 ohmswhen wired together in parallel with a short length of wire
*Four SD60 drivers wired into a speaker line roughly 250ft. in length will read 1.4 ohms
*Four SD60 drivers wired into a speaker line that is 25ft. will read .14 ohms
[[File:PD60ATDrivers.jpg|400px|PD60AT Drivers]]
*Single functional PD60AT driver will read 2.7 ohms
*Four PD60AT drivers will read .675 ohmswhen wired together in parallel with a short length of wire*Two PD60AT drivers together will read 1.35 ohmswhen wired together in parallel with a short length of wire
2,134
edits

Navigation menu