Changes

Jump to: navigation, search

No sound

16 bytes added, 19:05, 2 November 2018
no edit summary
==Testing Speakers==
It is crucial to determine which model of audio drivers are being tested. Then, disconnect the outside speakers from the two terminals on the back of the amplifier. Put a DC ohm meter across the terminals. If the reading is higher than the listed value, then one or more of the drivers could be open, or a connection is corroded. If lower, one or more drivers or the wiring may be shorted.
==PD60 Drivers==
[[File:PD60Drivers.jpg|200px400px|thumbframeless|left|PD60 Drivers]]
*Single functional PD60 driver will read 9.5 - 10 ohms
*Four PD60 drivers will read 2.5 ohms
==SD60 drivers==
*[[File:SD60Drivers.jpg|200px400px|thumbframeless|left|PD60 Drivers]]
*Single functional SD60 driver will read 9.5 - 10 ohms
*Four SD60 drivers will read 2.5 ohms
==PD60AT Transformer Drivers==
[[File:PD60ATDrivers.jpg|200px400px|thumbframeless|left|PD60 Drivers]]
2,255
edits

Navigation menu