Voicing preferences setup menu: Difference between revisions

(Created page with "Your Platinum Edition Carillon comes with 19 voice combinations. You may setup preferred voices from these 19 combinations. == Opening the menu == Open the System Setup Menu...")
 
Line 11: Line 11:
You can use the grey cursor buttons to select either the Split option or the voicing options on the right.  Once the voicing options on the right are flashing, you can use the up and down cursors to scroll through voicing options.   
You can use the grey cursor buttons to select either the Split option or the voicing options on the right.  Once the voicing options on the right are flashing, you can use the up and down cursors to scroll through voicing options.   


===previewing the arrangements==
==previewing the arrangements==
Pressing '''2''' on the front panel will allow you to hear the selected arrangement in the selected voice.
Pressing '''2''' on the front panel will allow you to hear the selected arrangement in the selected voice.



Revision as of 21:07, 30 December 2016

Your Platinum Edition Carillon comes with 19 voice combinations. You may setup preferred voices from these 19 combinations.

Opening the menu

Open the System Setup Menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display. Press the number 3 and the flashing lower line will read System Setup Menu then press the Enter button again. Press the number 2 and the flashing lower line will read Voicing Preferences then press the Enter button again.

It might look something like this:

Set Voice Preference
Split: No HB/Con Ch

navigating the menu

You can use the grey cursor buttons to select either the Split option or the voicing options on the right. Once the voicing options on the right are flashing, you can use the up and down cursors to scroll through voicing options.

previewing the arrangements

Pressing 2 on the front panel will allow you to hear the selected arrangement in the selected voice.

keyboard voice

Using the grey cursors on the left menu, find Keyb1 and then push the right cursor to select a voice. Use the up and down cursors to select a voice for the Keyboard. There is also a secondary keyboard option under Keyb2.

Saving the changes=

Pressing Enter will save changes and exit or you can use the left cursor to go back and choose another song to voice. Pressing the read Cancel button will exit without saving changes.

Closing the menu

When you are finished using the Play selections menu, press the red Cancel button until you see the current date and time on the display.