Tower performance menu: Difference between revisions

(Created page with "To activate the keyboard to play the carillon through the tower, simply press '''ENTER''' twice (from Standby mode). Since Tower Performance is the first option on the main me...")
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
To activate the keyboard to play the carillon through the tower, simply press '''ENTER''' twice (from Standby mode). Since Tower Performance is the first option on the main menu, it is instantly
<div style="font-size:84%">'''[[Chime_Master_Help|Help]] > [[Operating manuals]] '''</div>
available. 
 
== Inside and outside performance ==
 
=== Opening the menu ===
 
Open the Tower Performance menu by pressing the front panel green ''Enter'' button so that you read ''Main Menu'' on the top line of the display. Press any gray cursor button until the flashing lower line reads ''Tower Performance'' then press the ''Enter'' button again.
 
Notice that the green Outside light is on, indicating that the tower speakers are on and your
Notice that the green Outside light is on, indicating that the tower speakers are on and your
performance will be broadcast outside.
performance will be broadcast outside.
As you can see on the lower line of the display, the pre-programmed function buttons ''1'' to ''3''
 
(and corresponding ''F1'' to ''F3'' on the remote control) are available for immediate performance.
Something similar to the following screen will appear.  Your pre-programmed function buttons ''1'' to ''3'' (or ''F1'' to ''F3'' on the remote control) are available for immediate performance.
 
Voicing Pref Split
Swng Peal Toll Voice
 
=== Navigating the menu ===
 
Press '''F4''' on the remote or carillon to cycle through available voices on your carillon.  The system will remember the last voice you selected for the keyboard. 
 
=== Exiting the performance ===
When you are finished you may end the performance by pressing the red ''Cancel'' button until you see the current date and time on the display.  Or manually play a pre-programmed function (F1-F3). The system will cancel itself an hour after the last note has been played.
 
== Inside only performance==
=== Opening the menu ===
Open the Record menu by pressing the front panel green ''Enter'' button so that you read ''Main Menu'' on the top line of the display. Press any gray cursor button until the flashing lower line reads ''Record a Performance'' then press the ''Enter'' button again.
Notice that the green '''Outside''' light is off, indicating that the tower speakers are not on.  The current voice selection will be displayed across the top line.  Remote function buttons 1-3 control the record menu functions. 
 
Something similar to the following screen will appear. 
 
Concert Chime & Harp
Recd Play Save Voice
 
===Selecting keyboard bell voices===
Pressing '''4''' on the front panel ('''F4''') will cycle through the available [[Keyboard_Voices|bell voices]].  The last voice selected will be remembered. 
Platinum systems can be programmed to simplify this list of voices using the [[Voicing_preferences_setup_menu#Options|Voice Preference Setup]] screen.
 
=== Exiting keyboard mode ===
When you are finished you may end the performance by pressing the red ''Cancel'' button until you see the current date and time on the display.  The system will cancel itself an hour after the last note has been played.
 
== Also see ==
 
* [[Record_performance_menu|Inside only performance]] and recording menu
* Keyboard setup
** [[Voicing_preferences_setup_menu|Limit or expand keyboard voices]]
** [[Chime_tuning_setup_menu|Tune the keyboard chimes to your ogran]]
** [[Keyboard_sensitivity_setup_menu|Change the dynamic response of the keyboard]]
** [[Keyboard_size_and_MIDI_setup_menu|MIDI setup wizard]] to set the carillon to respond to your keyboard
* Troubleshooting
** [[Keyboard volume is low]]
** [[Keyboard_DST_fix|Keyboard not responding]]
 
[[category:manual]]
 
 
[[category:manual]]

Revision as of 19:32, 2 March 2018

Inside and outside performance

Opening the menu

Open the Tower Performance menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display. Press any gray cursor button until the flashing lower line reads Tower Performance then press the Enter button again.

Notice that the green Outside light is on, indicating that the tower speakers are on and your performance will be broadcast outside.

Something similar to the following screen will appear. Your pre-programmed function buttons 1 to 3 (or F1 to F3 on the remote control) are available for immediate performance.

Voicing Pref Split
Swng Peal Toll Voice

Navigating the menu

Press F4 on the remote or carillon to cycle through available voices on your carillon. The system will remember the last voice you selected for the keyboard.

Exiting the performance

When you are finished you may end the performance by pressing the red Cancel button until you see the current date and time on the display. Or manually play a pre-programmed function (F1-F3). The system will cancel itself an hour after the last note has been played.

Inside only performance

Opening the menu

Open the Record menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display. Press any gray cursor button until the flashing lower line reads Record a Performance then press the Enter button again. Notice that the green Outside light is off, indicating that the tower speakers are not on. The current voice selection will be displayed across the top line. Remote function buttons 1-3 control the record menu functions.

Something similar to the following screen will appear.

Concert Chime & Harp
Recd Play Save Voice

Selecting keyboard bell voices

Pressing 4 on the front panel (F4) will cycle through the available bell voices. The last voice selected will be remembered. Platinum systems can be programmed to simplify this list of voices using the Voice Preference Setup screen.

Exiting keyboard mode

When you are finished you may end the performance by pressing the red Cancel button until you see the current date and time on the display. The system will cancel itself an hour after the last note has been played.

Also see