Difference between revisions of "Tower performance menu"

(Created page with "To activate the keyboard to play the carillon through the tower, simply press '''ENTER''' twice (from Standby mode). Since Tower Performance is the first option on the main me...")
 
m
Line 1: Line 1:
To activate the keyboard to play the carillon through the tower, simply press '''ENTER''' twice (from Standby mode). Since Tower Performance is the first option on the main menu, it is instantly
== Opening the menu ==
available. 
 
Open the Play selections menu by pressing the front panel green ''Enter'' button so that you read ''Main Menu'' on the top line of the display. Press any gray cursor button until the flashing lower line reads ''Tower Performance'' then press the ''Enter'' button again.
 
Notice that the green Outside light is on, indicating that the tower speakers are on and your
Notice that the green Outside light is on, indicating that the tower speakers are on and your
performance will be broadcast outside.
performance will be broadcast outside.
As you can see on the lower line of the display, the pre-programmed function buttons ''1'' to ''3''
 
(and corresponding ''F1'' to ''F3'' on the remote control) are available for immediate performance.
Something similar to the following screen will appear.  Your pre-programmed function buttons ''1'' to ''3'' (or ''F1'' to ''F3'' on the remote control) are available for immediate performance.
 
Voicing Pref Split
Swng Peal Toll Voice
 
== Navigating the menu ==
 
Press '''F4''' on the remote or carillon to cycle through available voices on your carillon.  The system will remember the last voice you selected for the keyboard. 
 
==exiting the performance==
When you are finished you may end the performance by pressing the red ''Cancel'' button until you see the current date and time on the display.  The system will cancel itself an hour after the last note has been played.
 
[[category:manual]]

Revision as of 19:02, 30 December 2016

Opening the menu

Open the Play selections menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display. Press any gray cursor button until the flashing lower line reads Tower Performance then press the Enter button again.

Notice that the green Outside light is on, indicating that the tower speakers are on and your performance will be broadcast outside.

Something similar to the following screen will appear. Your pre-programmed function buttons 1 to 3 (or F1 to F3 on the remote control) are available for immediate performance.

Voicing Pref Split
Swng Peal Toll Voice

Navigating the menu

Press F4 on the remote or carillon to cycle through available voices on your carillon. The system will remember the last voice you selected for the keyboard.

exiting the performance

When you are finished you may end the performance by pressing the red Cancel button until you see the current date and time on the display. The system will cancel itself an hour after the last note has been played.