Changes

Remote AX

1,557 bytes added, 6 February
m
no edit summary
''' [[Play_Selection_AX|&larr; Previous Section]] &nbsp;&nbsp;&nbsp;&nbsp; [[Keyboard_AX|Next section &rarr;]] '''</div>
The Chime Master AX Remote control finally brings friction-lessimmediate, frustration free and secure control to the bell ringing world. Provided your bell ringing system has an Internet connection and your phone or tablet also has a good carrier broadband or WiFi data connection, one scan of a QR code will provide control of the system anywhere you go. Not everyone has Internet at their church, so we've provided alternative solutions for the same functionality when you are close to the carillon.
[[File:ChimeCenterRemote.jpg|frameless|right|400px]]
== Normal usage Setup ==
Tapping the Remote button on your front panel home the system's touch screen brings up a screen that has a Quick Response (QR) code on it. Scan the code with your phone or tablet to load the remote control page on your device.
With Internet access, the code will take you to your home screen served by the Chime Center web portal. Both the bell system and your phone/tablet must be connected to the Internet. Use your browser menu to save the remote control to your phone's home screen. You will be able to use your phone to control the bell system from anywhere you have an internet Internet connection.
=== Scanning the code ===
Sometimes the device camera will read the code more reliably when the system screen is dimmed. Click the front panel power button (the gold light) to dim the screen if unable to scan at full brightness.
=== Save to home screen === The first use of the remote app will be in your phone's browser. If you use your browser's Add To Home feature, it may appear on the home screen, or it may appear in your listing of all apps (from where you can drag it out to a home screen). If your secure authentication expires, you will need to update it by scanning a new QR Code on the bell ringing system. Look for a banner at the bottom of future app releases to install the app to your smart device home screen. == Functionality ===Your home screen will now be available on your phone or tablet to activate quick functions for music and ringing. You can create and edit these quick functions using Settings - [[Customize_Home_AX|Customize Home menu]]. [[Play_Selection_AX|Play Selection]] is not available on the remote at this time, but we expect it to be released in a 2020 update.
Your home screen === Keyboard page ===[[File:RemoteKeyboard.jpg|frameless|right|150px]]The keyboard page provides you with practice and performance features. The keyboard will now be available play inside only by default, but you can switch on outside zones if desired. You can record, save and title your phone recordings, all within this app. This is especially helpful if your organ or tablet keyboard is not right next to activate music and ringing. The keyboard performance and recording screen will soon be availableyour bell system.
The remote screen Keyboard control on the app is similar to the [[Customize_Home_AXKeyboard_AX|customizablekeyboard page]] per useron the system's touch screen. You Entering Keyboard will see stop anything that is currently playing and suspend the same automatic schedule and disable quick function buttons as you do when you log in to functions while it is open. The status icon at the front screen top right of the carillon. In addition you system's touch screen will have Next selection and Stop all buttonsshow that it is in the keyboard mode.
The Play Selection recording controls are at the bottom of the page and may require that you scroll down to reveal them.;Record:Press the red button with the white circle to begin recording;Playback:Press the green button is not available on with the remote play arrow to listen to conserve your data usage, as recording;Stop:Press the music database is massive. You can pre-plan and [[Customize_Home_AX|create buttons for specific songs]] ahead of time for use on red button with the white square to stop playback;Save:Press the gray button with the remote.disk icon to save your recording
==== Amplifier delay ====Be sure to tap the back button to close Keyboard mode and allow the schedule to resume. Otherwise, the [[Keyboard_setup_AX|keyboard timeout]] will be in effect (one hour default after the last note played).
If you wish to change the amplifier has not been used in the last five minutes it will shut off. Turning back six voices available to you on results in a delay (as much as 20 seconds) after pressing a quick function while the amplifier returns to its active state. Tapping the Stop button app, you can edit them on the remote will tell the amplifier to get ready and stay ready for the next five minutes. Continuing to press the stop button every few minutes will extend the amplifier ON timetouch screen Keyboard menu by tapping Instruments under Settings.
=== Save to home screen Amplifier delay ===[[File:StatusIconsAX.png|frameless|right|180px]]The status icon at the top right of the display shows the audio system status.
The first use will be in your browser. If you use your browser's Add To Home featureLaunching the remote app immediately wakes the audio system, but it may appear on takes a few seconds for the home screen, or it may appear in your listing of all apps (from where you can drag it out amplifiers to be ready to a home screen)play. If your secure authentication expiresyou initiate ringing before the amplifiers are ready, you will need to update it by scanning experience a new QR Code on the bell delay before ringing systembegins.
Look for a banner at Closing the bottom of future app releases to install screen starts a five minute timeout after which the app amplifier will return to your smart device home screensleep mode.
== Limited connectivity modes ==
Without an Internet connection there are two alternate ways to control the system. This is easier for some phones and tablets than others because the phone will continually 'hunt' for Internet access. Without Internet updates, your local remote control screen may lack all of the functionality described above.
=== Local Area Network ===
The secure access authentication given in the QR code can be set to expire after so many days by the administrator. Upon expiration you will not be able to access the remote without re-scanning the QR code.
The administrator can also set restricted access times that during which the remote control will refuse connections.
<div style="font-size:84%">''' [[Play_Selection_AX|&larr; Previous Section]] &nbsp;&nbsp;&nbsp;&nbsp; [[Keyboard_AX|Next section &rarr;]] '''</div>
[[Category:AX Manual]]
2,454
edits