In addition to these packages, we can customize a system for you with:

  • amplifier to connect existing working outdoor speakers
  • replacement drivers for existing horn speakers
  • installation and training
  • directional control
  • sanctuary sound
  • remote amplifier installation
  • control and augmentation of tower bells and chimes
  • tower clocks


inSpire Ulitimate

  • Qty 2 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speaker
  • Qty 8 Premium long throw mid-range horns
    • Qty 8 Premium horn drivers
  • Qty 2 inSpire Sub 12 inch sub-woofers

Local Electrician required to install five pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.

inSpire Professional

  • Qty 2 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 8 Premium long throw mid-range horns
    • Qty 8 Premium horn drivers

Local electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.

inSpire Premium

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 4 Premium long throw mid-range horns
    • Qty 4 Premium horn drivers

Local electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.

inSpire Performance

Local electrician required to install two pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.

inSpire Ascent

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 1 inSpire Twelve full-range horn speaker
  • Qty 4 Premium long throw mid-range horns
    • Qty 4 Premium horn drivers

Local electrician required to install three pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system).

Community Outreach

  • Qty 1 370W Amplifier
    • Audio cable kit
    • Amplifier settings pre-configured
  • Qty 4 Premium long throw Horns
    • Qty 4 Premium horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 4 SJTO driver pigtails with fork terminals installed
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire

Value Outreach

  • An option for the Six-SS carillon.
  • 60W Amplifier module built-in to carillon
  • Qty 2 Standard long throw Horns
    • Qty 2 Standard horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 2 SJTO driver pigtails with fork terminals installed
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire