No edit summary
No edit summary
Line 13: Line 13:




=== '''inSpire™''' Ulitimate ===
=== '''inSpire™''' Ultimate ===


* Qty 2 InSpire ampllifiers
* Qty 2 InSpire amplifiers
** Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
** Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
*** Two long throw directions from tower (independent levels)
*** Two long throw directions from tower (independent levels)
Line 35: Line 35:
=== '''inSpire™''' Professional ===
=== '''inSpire™''' Professional ===


* Qty 2 InSpire ampllifiers
* Qty 2 InSpire amplifiers
** Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
** Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
*** Two long throw directions from tower (independent levels)
*** Two long throw directions from tower (independent levels)
Line 69: Line 69:
* Amplifier Option 1600
* Amplifier Option 1600
** Qty 1 [[InSpire_Amplifier#inSpire_1600|inSpire DSP 1600W]] Amplifier
** Qty 1 [[InSpire_Amplifier#inSpire_1600|inSpire DSP 1600W]] Amplifier
** Low-Z requires four pairs of wire o the tower
** Low-Z requires four pairs of wire to the tower
** Each speaker connected to individual 4-Ohm 400W outputs
** Each speaker connected to individual 4-Ohm 400W outputs
** Allows individual level control to each direction at amplifier
** Allows individual level control to each direction at amplifier

Revision as of 13:51, 20 February 2019


In addition to these packages, we can customize a system for you with:

  • amplifier to connect existing working outdoor speakers
  • replacement drivers for existing horn speakers
  • installation and training
  • directional control
  • sanctuary sound
  • remote amplifier installation
  • control and augmentation of tower bells and chimes
  • tower clocks


inSpire™ Ultimate

  • Qty 2 InSpire amplifiers
    • Qty 1 inSpire DSP 2500W Amplifier
      • Two long throw directions from tower (independent levels)
      • Subwoofer channel
      • Inside monitoring amplifier channel
    • Qty 1 inSpire DSP 1600W Amplifier
      • Full range 70V output
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speaker
  • Qty 8 Premium long-throw mid-range horns
    • Qty 8 Premium horn drivers
  • Qty 1 inSpire Sub 12 inch sub-woofer

Local Electrician required to install four pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.

inSpire™ Professional

  • Qty 2 InSpire amplifiers
    • Qty 1 inSpire DSP 2500W Amplifier
      • Two long throw directions from tower (independent levels)
      • Future subwoofer upgrade channel (unused)
      • 400W inside monitoring amplifier channel
    • Qty 1 inSpire DSP 1600W Amplifier
      • Full range 70V output
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 8 * Qty 8 Premium long-throw mid-range horns
    • Qty 8 Premium horn drivers

Local electrician required to install three (or four for future upgrades) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.

inSpire™ Premium

  • Qty 1 inSpire DSP 2500W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 4 Premium long-throw mid-range horns
    • Qty 4 Premium horn drivers

Local electrician required to install two pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.

inSpire™ Performance

  • Amplifier Option 1600
    • Qty 1 inSpire DSP 1600W Amplifier
    • Low-Z requires four pairs of wire to the tower
    • Each speaker connected to individual 4-Ohm 400W outputs
    • Allows individual level control to each direction at amplifier
  • Amplifier Option 2500
    • Qty 1 inSpire DSP 2500W Amplifier
    • 70V works with single pair of wires to the tower
    • All four paralleled to single 70V 1000W output
    • Loudness of each speaker determined at time of installation
  • Audio cable kit
    • Cables between carillon and amplifier for audio and control signals
    • SJTO pigtails for each speaker
  • Amplifier settings pre-configured
  • Qty 4 inSpire Twelve full-range horn speakers

Local electrician required to install single or four (see options above) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.

inSpire™ Ascent

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 1 inSpire Twelve full-range horn speaker
  • Qty 4 Premium long-throw mid-range horns
    • Qty 4 Premium horn drivers

Local electrician required to install two pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system).

inSpire™ Outreach

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
  • Qty 4 Premium long-throw horns
    • Qty 4 Premium horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 4 SJTO driver
    • Qty 4 Driver wiring pigtails with fork terminals attached
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire

Community Outreach

  • Qty 1 370W Amplifier
    • Audio cable kit
    • Amplifier settings pre-configured
  • Qty 4 Premium long-throw horns
    • Qty 4 Premium horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 4 SJTO driver
    • Qty 4 Driver wiring pigtails with fork terminals attached
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire

Value Outreach

  • An option for the Six-SS carillon.
  • 60W Amplifier module built-in to carillon
  • Pair of economy speakers
    • Qty 2 standard horns
    • Qty 2 standard horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 2 SJTO driver pigtails with fork terminals installed
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire