(46 intermediate revisions by 3 users not shown)
Line 1: Line 1:
These are typical audio systems that are added to an electronic carillon unit to complete a system. The components offered may vary with time. Use this page for an accurate description of systems outlined in on our website and printed materials. Call us at 800.344.7464 if you receive a quotation that does not match a system listed below.
<div style="font-size:84%">'''[http://www.ChimeMaster.com Home] > [[Chime_Master_Help|Help]] > [[Electronic_Carillon_Components|Specifications]] '''</div><br />
* '''inSpire™''' brochure [[Media:Inspire2017.pdf|PDF download]]


In addition to these packages, we can customize a system for you with:
In addition to these packages, we can customize a system for you with:
* amplifier to connect existing working outdoor speakers
* replacement drivers for existing horn speakers
* installation and training
* installation and training
* directional control
* directional control
Line 9: Line 12:
* tower clocks
* tower clocks


Updated October 2016


== inSpire Full Range Audio Systems ==
=== '''inSpire™''' Ultimate ===


2016 inSpire systems available only with Millennium or Platinum carillons with full-range output option.
* Qty 2 InSpire amplifiers
 
** Qty 1 [[InSpire_Amplifier#inSpire_1600|inSpire DSP 1600W]] Amplifier
=== inSpire Ulitimate ===
*** Two long throw directions from tower (independent levels) - four horns for each direction
 
*** Subwoofer upgrade channel (unused)
* Qty 2 inSpire DSP 1600W Amplifier
*** 400W inside monitoring amplifier channel (inside speaker included)
** Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
*** Two full range output directions (independent levels) - two full range speakers for each direction
** Custom engineered for each installation (tower survey not included)
** Custom engineered for each installation (tower survey not included)
*** Voicing for speaker combination below
*** Voicing for speaker combination below
*** Speaker protection programming
*** Speaker protection programming
*** Time alignment compensation for speaker air columns and mounting position
*** Time alignment compensation for speaker air columns and mounting position
* Qty 4 [[inSpire Twelve]] full-range horn speaker
* Qty 4 [[inSpire Twelve]] full-range horn speakers
* Qty 8 Premium long throw mid-range horns
* Qty 8 * Qty 8 [[Premium_long-throw_horn_specification|Premium long-throw mid-range horns]]
** Qty 8 Premium horn drivers
** Qty 8 Premium horn drivers
* Qty 2 inSpire Twelve inch sub-woofers
* Qty 1 [[inSpire Sub]] 12 inch sub-woofer
* Qty 1 Rack Cabinet for system electronics
* Qty 1 8 inch two way inside monitor speaker
* Qty 1 PC with Management Suite software installed
** Premium License for Management Suite
** Free iOS/Android remote control app


Local Electrician required to install five pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.
Local Electrician required to install five pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.


=== inSpire Professional ===
=== '''inSpire™''' Professional ===


* Qty 2 inSpire DSP 1600W Amplifier
* Qty 2 InSpire amplifiers
** Qty 1 [[InSpire_Amplifier#inSpire_1600|inSpire DSP 1600W]] Amplifier
*** Two long throw directions from tower (independent levels) - four horns for each direction
*** Future subwoofer upgrade channel (unused)
*** 400W inside monitoring amplifier channel (inside speakers optional)
** Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
*** Two full range output directions (independent levels) - two full range speakers for each direction
** Custom engineered for each installation (tower survey not included)
** Custom engineered for each installation (tower survey not included)
*** Voicing for speaker combination below
*** Voicing for speaker combination below
Line 41: Line 48:
*** Time alignment compensation for speaker air columns and mounting position
*** Time alignment compensation for speaker air columns and mounting position
* Qty 4 [[inSpire Twelve]] full-range horn speakers
* Qty 4 [[inSpire Twelve]] full-range horn speakers
* Qty 8 Premium long throw mid-range horns
* Qty 8 * Qty 8 [[Premium_long-throw_horn_specification|Premium long-throw mid-range horns]]
** Qty 8 Premium horn drivers
** Qty 8 Premium horn drivers
* Qty 1 Rack Cabinet for system electronics
* Qty 1 PC with Management Suite software installed
** Premium License for Management Suite


Local electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.
Local electrician required to install four (or five for future subwoofer upgrade) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.


=== inSpire Premium ===
=== '''inSpire™''' Premium ===


* Qty 1 inSpire DSP 1600W Amplifier
* Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
** Custom engineered for each installation (tower survey not included)
** Custom engineered for each installation (tower survey not included)
*** Voicing for speaker combination below
*** Voicing for speaker combination below
Line 57: Line 61:
*** Time alignment compensation for speaker air columns and mounting position
*** Time alignment compensation for speaker air columns and mounting position
* Qty 4 [[inSpire Twelve]] full-range horn speakers
* Qty 4 [[inSpire Twelve]] full-range horn speakers
* Qty 4 Premium long throw mid-range horns
* Qty 4 [[Premium_long-throw_horn_specification|Premium long-throw mid-range horns]]
** Qty 4 Premium horn drivers
** Qty 4 Premium horn drivers


Local electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.
Amplifier should be located close to speakers.
 
Local electrician required to install two pair of stranded AWG 12 THHN (if longer than 50 feet, larger wire may be required to meet full-range demand of 28A peak current) in conduit from amplifier location to the tower or steeple junction boxes. This system is not available for rooftop mounting.
 
=== '''inSpire™''' Performance ===
 
* Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
** Custom engineered for each installation (tower survey not included)
*** Voicing for speaker system below
*** Speaker protection programming
* Four  [[inSpire Twelve]] full-range horn speakers in tower
** All four tower speakers paralleled to a single pair wires run a '''short''' distance
** All four paralleled to single 2-Ohm 1875W output (three paralleled output channels)
** Inside speaker output D for up to 625W 70V (multi-drop for inside speakers with individual power settings)
* Audio cable kit
** Cables between carillon and amplifier for audio and control signals
** SJTO pigtails for each speaker
 
Amplifier should be installed within 50 feet of the speakers.
 
Local electrician required to install two pair of stranded AWG 12 THHN (if longer than 50 feet, larger wire may be required to meet full-range demand of 28A peak current) in conduit from amplifier location to the tower or steeple junction boxes. This system is not available for rooftop mounting. Additional wiring for optional inside speaker may also be installed.


=== inSpire Ascent ===
=== '''inSpire™''' Ascent ===


* Qty 1 inSpire DSP 1600W Amplifier
* Qty 1 [[InSpire_Amplifier|inSpire DSP 1600W]] Amplifier
** Custom engineered for each installation (tower survey not included)
** Custom engineered for each installation (tower survey not included)
*** Voicing for speaker combination below
*** Voicing for speaker combination below
Line 70: Line 94:
*** Time alignment compensation for speaker air columns and mounting position
*** Time alignment compensation for speaker air columns and mounting position
* Qty 1 [[inSpire Twelve]] full-range horn speaker
* Qty 1 [[inSpire Twelve]] full-range horn speaker
* Qty 4 Premium long throw mid-range horns
* Qty 4 [[Premium_long-throw_horn_specification|Premium long-throw mid-range horns]]
** Qty 4 Premium horn drivers
** Qty 4 Premium horn drivers


Local electrician required to install three pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system).
Local electrician required to install two pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system).


=== inSpire Performance ===
=== '''inSpire™''' Outreach ===


* Qty 1 Premium 1100W Amplifier
* Qty 1 [[InSpire_Amplifier|inSpire DSP 1600W]] Amplifier
** Audio cable kit
** Custom engineered for each installation (tower survey not included)
** Amplifier settings pre-configured
*** Voicing for speaker combination below
* Qty 4 [[inSpire Twelve]] full-range horn speakers
*** Speaker protection programming
 
* Qty 4 [[Premium_long-throw_horn_specification|Premium long-throw horns]]
Local electrician required to install two pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.
 
== Community Outreach ==
 
=== Premium Outreach ===
 
* Qty 1 Standard 370W Amplifier
** Audio cable kit
** Amplifier settings pre-configured
* Qty 4 Premium long throw Horns
** Qty 4 Premium horn drivers
** Qty 4 Premium horn drivers
* Installation kit (does not include optional roof peak speaker bracket)
* Installation kit (does not include optional roof peak speaker bracket)
** Qty 1 Junction box and cover
** Qty 1 Junction box and cover
** Qty 4 SJTO driver pigtails with fork terminals installed
** Qty 4 SJTO driver
** Qty 4 Driver wiring pigtails with fork terminals attached
** Brass set-screw wire nut kit
** Brass set-screw wire nut kit
** Screw Driver
** Screw Driver
* 250 feet AWG 14-2 SJTO wire
* 250 feet AWG 14-2 SJTO wire


=== Standard Outreach ===
=== Community Outreach ===


* Qty 1 Standard 370W Amplifier
* Qty 1 [[Standard_Amplifier|370W Amplifier]]
** Audio cable kit
** Audio cable kit
** Amplifier settings pre-configured
** Amplifier settings pre-configured
* Qty 4 Standard long throw Horns
* Qty 4 [[Premium_long-throw_horn_specification|Premium long-throw horns]]
** Qty 4 Standard horn drivers
** Qty 4 Premium horn drivers
* Installation kit (does not include optional roof peak speaker bracket)
* Installation kit (does not include optional roof peak speaker bracket)
** Qty 1 Junction box and cover
** Qty 1 Junction box and cover
** Qty 4 SJTO driver pigtails with fork terminals installed
** Qty 4 SJTO driver
** Qty 4 Driver wiring pigtails with fork terminals attached
** Brass set-screw wire nut kit
** Brass set-screw wire nut kit
** Screw Driver
** Screw Driver
Line 116: Line 132:
=== Value Outreach ===
=== Value Outreach ===


* Module 60W Amplifier built-in to carillon
* An option for the Six-SS carillon.
* Qty 2 Standard long throw Horns
* [[60W_Amplifier_Module|60W Amplifier module]] built-in to carillon
** Qty 2 Standard horn drivers
* Pair of [[Standard_economical_speaker_specification|economy speakers]]
** Qty 2 standard horns
** Qty 2 standard horn drivers
* Installation kit (does not include optional roof peak speaker bracket)
* Installation kit (does not include optional roof peak speaker bracket)
** Qty 1 Junction box and cover
** Qty 1 Junction box and cover
Line 126: Line 144:
* 250 feet AWG 14-2 SJTO wire
* 250 feet AWG 14-2 SJTO wire


[[category:Specification]][[category:inSpire]]
 
[[category: Electronic Carillon Specification]]
[[category: inSpire Specification]]

Revision as of 21:40, 7 August 2019


In addition to these packages, we can customize a system for you with:

  • amplifier to connect existing working outdoor speakers
  • replacement drivers for existing horn speakers
  • installation and training
  • directional control
  • sanctuary sound
  • remote amplifier installation
  • control and augmentation of tower bells and chimes
  • tower clocks


inSpire™ Ultimate

  • Qty 2 InSpire amplifiers
    • Qty 1 inSpire DSP 1600W Amplifier
      • Two long throw directions from tower (independent levels) - four horns for each direction
      • Subwoofer upgrade channel (unused)
      • 400W inside monitoring amplifier channel (inside speaker included)
    • Qty 1 inSpire DSP 2500W Amplifier
      • Two full range output directions (independent levels) - two full range speakers for each direction
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 8 * Qty 8 Premium long-throw mid-range horns
    • Qty 8 Premium horn drivers
  • Qty 1 inSpire Sub 12 inch sub-woofer
  • Qty 1 8 inch two way inside monitor speaker

Local Electrician required to install five pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Professional

  • Qty 2 InSpire amplifiers
    • Qty 1 inSpire DSP 1600W Amplifier
      • Two long throw directions from tower (independent levels) - four horns for each direction
      • Future subwoofer upgrade channel (unused)
      • 400W inside monitoring amplifier channel (inside speakers optional)
    • Qty 1 inSpire DSP 2500W Amplifier
      • Two full range output directions (independent levels) - two full range speakers for each direction
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 8 * Qty 8 Premium long-throw mid-range horns
    • Qty 8 Premium horn drivers

Local electrician required to install four (or five for future subwoofer upgrade) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Premium

  • Qty 1 inSpire DSP 2500W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 4 Premium long-throw mid-range horns
    • Qty 4 Premium horn drivers

Amplifier should be located close to speakers.

Local electrician required to install two pair of stranded AWG 12 THHN (if longer than 50 feet, larger wire may be required to meet full-range demand of 28A peak current) in conduit from amplifier location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Performance

  • Qty 1 inSpire DSP 2500W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker system below
      • Speaker protection programming
  • Four inSpire Twelve full-range horn speakers in tower
    • All four tower speakers paralleled to a single pair wires run a short distance
    • All four paralleled to single 2-Ohm 1875W output (three paralleled output channels)
    • Inside speaker output D for up to 625W 70V (multi-drop for inside speakers with individual power settings)
  • Audio cable kit
    • Cables between carillon and amplifier for audio and control signals
    • SJTO pigtails for each speaker

Amplifier should be installed within 50 feet of the speakers.

Local electrician required to install two pair of stranded AWG 12 THHN (if longer than 50 feet, larger wire may be required to meet full-range demand of 28A peak current) in conduit from amplifier location to the tower or steeple junction boxes. This system is not available for rooftop mounting. Additional wiring for optional inside speaker may also be installed.

inSpire™ Ascent

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 1 inSpire Twelve full-range horn speaker
  • Qty 4 Premium long-throw mid-range horns
    • Qty 4 Premium horn drivers

Local electrician required to install two pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system).

inSpire™ Outreach

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
  • Qty 4 Premium long-throw horns
    • Qty 4 Premium horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 4 SJTO driver
    • Qty 4 Driver wiring pigtails with fork terminals attached
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire

Community Outreach

  • Qty 1 370W Amplifier
    • Audio cable kit
    • Amplifier settings pre-configured
  • Qty 4 Premium long-throw horns
    • Qty 4 Premium horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 4 SJTO driver
    • Qty 4 Driver wiring pigtails with fork terminals attached
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire

Value Outreach

  • An option for the Six-SS carillon.
  • 60W Amplifier module built-in to carillon
  • Pair of economy speakers
    • Qty 2 standard horns
    • Qty 2 standard horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 2 SJTO driver pigtails with fork terminals installed
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire