Line 71: Line 71:
* inSpire Performance 1600
* inSpire Performance 1600
** Qty 1 [[InSpire_Amplifier#inSpire_1600|inSpire DSP 1600W]] Amplifier
** Qty 1 [[InSpire_Amplifier#inSpire_1600|inSpire DSP 1600W]] Amplifier
** Low-Z requires two pairs of wire to the tower
** Each speaker connected to a dual bridged 70V 800W output
** Each speaker connected to a dual bridged 70V 800W output
** Allows individual level control to two directions
** Allows individual level control to two directions
Line 79: Line 78:
** Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
** Qty 1 [[InSpire_Amplifier#inSpire_2500|inSpire DSP 2500W]] Amplifier
** All four tower speakers paralleled to a single pair wires run a '''short''' distance
** All four tower speakers paralleled to a single pair wires run a '''short''' distance
** All four paralleled to single 2-Ohm 1875W output
** All four paralleled to single 2-Ohm 1875W output (three paralleled output channels)
** Inside speaker output for up to 8-Ohm 625W
** Inside speaker output D for up to 625W 70V (multi-drop for inside speakers with individual power settings)
* Audio cable kit
* Audio cable kit
** Cables between carillon and amplifier for audio and control signals
** Cables between carillon and amplifier for audio and control signals
Line 87: Line 86:
* Qty 4 [[inSpire Twelve]] full-range horn speakers
* Qty 4 [[inSpire Twelve]] full-range horn speakers


Local electrician required to install single or dual (see options above) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.
Local electrician required to install single short distance (Performance 2500) or dual (Performance 1600) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Additionally optional inside wiring to optional inside speaker location(s) (Performance 2500). This system is not available for rooftop mounting.


=== '''inSpire™''' Ascent ===
=== '''inSpire™''' Ascent ===

Revision as of 16:19, 26 July 2019


In addition to these packages, we can customize a system for you with:

  • amplifier to connect existing working outdoor speakers
  • replacement drivers for existing horn speakers
  • installation and training
  • directional control
  • sanctuary sound
  • remote amplifier installation
  • control and augmentation of tower bells and chimes
  • tower clocks


inSpire™ Ultimate

  • Qty 2 InSpire amplifiers
    • Qty 1 inSpire DSP 2500W Amplifier
      • Two long throw directions from tower (independent levels)
      • Subwoofer channel
      • Inside monitoring amplifier channel
    • Qty 1 inSpire DSP 1600W Amplifier
      • Full range 70V output
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speaker
  • Qty 8 Premium long-throw mid-range horns
    • Qty 8 Premium horn drivers
  • Qty 1 inSpire Sub 12 inch sub-woofer

Local Electrician required to install four pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Professional

  • Qty 2 InSpire amplifiers
    • Qty 1 inSpire DSP 2500W Amplifier
      • Two long throw directions from tower (independent levels)
      • Future subwoofer upgrade channel (unused)
      • 400W inside monitoring amplifier channel
    • Qty 1 inSpire DSP 1600W Amplifier
      • Full range 70V output
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 8 * Qty 8 Premium long-throw mid-range horns
    • Qty 8 Premium horn drivers

Local electrician required to install three (or four for future upgrades) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Premium

  • Qty 1 inSpire DSP 2500W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 4 inSpire Twelve full-range horn speakers
  • Qty 4 Premium long-throw mid-range horns
    • Qty 4 Premium horn drivers

Local electrician required to install two pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for rooftop mounting.

inSpire™ Performance

Four inSpire Twelve full-range horn speakers in tower

  • inSpire Performance 1600
    • Qty 1 inSpire DSP 1600W Amplifier
    • Each speaker connected to a dual bridged 70V 800W output
    • Allows individual level control to two directions
    • No inside speaker output
  • inSpire Performance 2500
    • Qty 1 inSpire DSP 2500W Amplifier
    • All four tower speakers paralleled to a single pair wires run a short distance
    • All four paralleled to single 2-Ohm 1875W output (three paralleled output channels)
    • Inside speaker output D for up to 625W 70V (multi-drop for inside speakers with individual power settings)
  • Audio cable kit
    • Cables between carillon and amplifier for audio and control signals
    • SJTO pigtails for each speaker
  • Amplifier settings pre-configured
  • Qty 4 inSpire Twelve full-range horn speakers

Local electrician required to install single short distance (Performance 2500) or dual (Performance 1600) pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Additionally optional inside wiring to optional inside speaker location(s) (Performance 2500). This system is not available for rooftop mounting.

inSpire™ Ascent

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
      • Time alignment compensation for speaker air columns and mounting position
  • Qty 1 inSpire Twelve full-range horn speaker
  • Qty 4 Premium long-throw mid-range horns
    • Qty 4 Premium horn drivers

Local electrician required to install two pair of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system).

inSpire™ Outreach

  • Qty 1 inSpire DSP 1600W Amplifier
    • Custom engineered for each installation (tower survey not included)
      • Voicing for speaker combination below
      • Speaker protection programming
  • Qty 4 Premium long-throw horns
    • Qty 4 Premium horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 4 SJTO driver
    • Qty 4 Driver wiring pigtails with fork terminals attached
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire

Community Outreach

  • Qty 1 370W Amplifier
    • Audio cable kit
    • Amplifier settings pre-configured
  • Qty 4 Premium long-throw horns
    • Qty 4 Premium horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 4 SJTO driver
    • Qty 4 Driver wiring pigtails with fork terminals attached
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire

Value Outreach

  • An option for the Six-SS carillon.
  • 60W Amplifier module built-in to carillon
  • Pair of economy speakers
    • Qty 2 standard horns
    • Qty 2 standard horn drivers
  • Installation kit (does not include optional roof peak speaker bracket)
    • Qty 1 Junction box and cover
    • Qty 2 SJTO driver pigtails with fork terminals installed
    • Brass set-screw wire nut kit
    • Screw Driver
  • 250 feet AWG 14-2 SJTO wire