Difference between revisions of "No sound"

From Chime Master Help
Jump to: navigation, search
Line 4: Line 4:
  
 
==PD60 Drivers==
 
==PD60 Drivers==
[[File:PD60Drivers.jpg|400px|thumb|left|PD60 Drivers]]
+
[[File:PD60Drivers.jpg|200px|thumb|left|PD60 Drivers]]
 
-Single functional PD60 driver will read 9.5 - 10 ohms
 
-Single functional PD60 driver will read 9.5 - 10 ohms
 
-Four PD60 drivers will read 2.5 ohms
 
-Four PD60 drivers will read 2.5 ohms
Line 12: Line 12:
  
 
==SD60 drivers==
 
==SD60 drivers==
[[File:SD60Drivers.jpg|400px|thumb|left|PD60 Drivers]]
+
[[File:SD60Drivers.jpg|200px|thumb|left|PD60 Drivers]]
 
-Single functional SD60 driver will read 9.5 - 10 ohms
 
-Single functional SD60 driver will read 9.5 - 10 ohms
 
-Four SD60 drivers will read 2.5 ohms
 
-Four SD60 drivers will read 2.5 ohms
Line 20: Line 20:
  
 
==PD60AT Transformer Drivers==
 
==PD60AT Transformer Drivers==
[[File:PD60ATDrivers.jpg|400px|thumb|left|PD60 Drivers]]
+
[[File:PD60ATDrivers.jpg|200px|thumb|left|PD60 Drivers]]

Revision as of 14:57, 2 November 2018

Testing Speakers

It is crucial to determine which model of audio drivers are being tested. Then, disconnect the outside speakers from the two terminals on the back of the amplifier. Put a DC ohm meter across the terminals. If the reading is higher than the listed value, then one or more of the drivers could be open, or a connection is corroded. If lower, one or more drivers or the wiring may be shorted.

PD60 Drivers

PD60 Drivers

-Single functional PD60 driver will read 9.5 - 10 ohms -Four PD60 drivers will read 2.5 ohms -Two PD60 drivers together will read 5 ohms -Four PD60 drivers wired into a speaker line roughly 250ft. in length will read 1.4 ohms -Four PD60 drivers wired into a speaker line that is 25ft. will read .14 ohms

SD60 drivers

PD60 Drivers

-Single functional SD60 driver will read 9.5 - 10 ohms -Four SD60 drivers will read 2.5 ohms -Two SD60 drivers together will read 5 ohms -Four SD60 drivers wired into a speaker line roughly 250ft. in length will read 1.4 ohms -Four SD60 drivers wired into a speaker line that is 25ft. will read .14 ohms

PD60AT Transformer Drivers

PD60 Drivers