- Wired
- Connect an Ethernet cable from your router to the labeled jack on the back of the Platinum AX. This will be recognized immediately.
- From the home page of the Platinum AX choose Remote.
- After entering your PIN, the system will check its network connection status. Use the camera or QR reader on your smart phone or other device to scan the displayed QR code. Tap the link to open the Chime.Center Remote in your phone’s browser.
- Wireless
- From the home page of the Platinum AX, choose Settings then Network. At the top, you can view if you are connected via an Ethernet cable or a wireless network.