Lightning damage to electronic systems: Difference between revisions

(created)
 
 
(19 intermediate revisions by the same user not shown)
Line 1: Line 1:
Chime Master carillon systems and ringing equipment are provided with several stages of internal surge protection circuits. Lightning strikes occurring near or directly to nearby power lines can cause an excessive surge of voltage that can damage the unit.
<div style="font-size:84%">'''[http://www.ChimeMaster.com Home] > [[Chime_Master_Help|Help]] > [[Maintenance]] '''</div><br />
== Risk ==


Lightning damage is uncommon, but it can occur to any electronic device. We suggest that you unplug all electronic products during storms, especially if you are concerned about it or if you live in an area with frequent and/or severe electrical storms. As with any valuable equipment purchase, you should review your insurance policy to be sure that your carillon is covered for fire, theft, vandalism or damage due to electrical storms.
Lightning is responsible for over a billion dollars in property damage every year, according to Underwriters Laboratories (UL). Lightning risk is a function of the area of a structure, the height and the number of strikes per year per square mile for the region. Churches are usually the tallest structure in a given area. In addition, a church may also have a bell tower or tall spire that can double the structure's height. This has given rise to the adage, "[http://lightning.org/are-churches-attracting-more-lightning-than-sinners-how-protection-systems-can-prevent-losses/ Churches attract more lightning than sinners]."


Bell ringing equipment damage usually comes in on the AC power line. Our current products rarely suffer lightning damage of this type, except for an occasional blown fuse. Other voltage spikes conducted through speaker line typically go no farther than the amplifier and the speaker drivers themselves. Speaker wiring should be routed on the opposite corner of the tower from the lightning and structural ground conductors. Long parallel wire runs essentially become a large transformer that can couple damaging spike currents from one to the other.
Lightning damage is uncommon to Chime Master installations, but it can occur to any electronic device. We suggest that you unplug all connections, not only power, to all electronic products before major storms, especially if you are concerned about it or if you live in an area with frequent and/or severe electrical storms. As with any valuable equipment purchase, you should review your insurance policy to be sure that your bell ringing equipment is covered for fire, theft, vandalism or damage due to electrical storms.


Bells hung on improperly grounded frames can receive high static charges that can dissipate through the electric ground wires. The purpose of electrical grounding conductors are to prevent shock hazards and they should never be carriers of high potential atmospheric charges. The spikes they carry to the electrical system can cause damage beyond the ringing equipment into sensitive IT, phones and other musical instruments.
== Causes ==


Metal framing within the tower structure needs to be bonded to an earth grounding rod, and the bell frame should be adequately bonded to the structural ground. Lightning rods should also be used and bonded to the main conductor leading to the grounding rod.
Bell ringing equipment damage usually comes in on the AC power line. Our current products rarely suffer lightning damage of this type, except for an occasional blown fuse. Other voltage spikes electromagnetically coupled into the speaker line typically go no farther than the amplifier and the speaker drivers themselves. Speaker wiring should be routed on the opposite corner of the tower from the lightning and structural ground conductors. Long parallel wire runs essentially become a large transformer that can couple damaging spike currents from one to the other.


You should have a certified lightning expert check your structure for adequate protection. You can find more information on lightning protection from the following web resources.
Bells hung on improperly grounded frames can receive high static charges that can dissipate through the electric ground wires. The purpose of electrical grounding conductors are to prevent shock hazards and they should never be carriers of high potential atmospheric charges. The spikes they carry to the electrical system can cause damage beyond the ringing equipment into sensitive (and expensive) computers, AV equipment, phone systems and other musical instruments.


* [http://Lightning.org Lightning.org]
== Minimizing risk ==
 
Chime Master can provide additional surge suppression components for both ends of the speaker line to minimize damage to drivers and amplifiers. These components require a suitable ground at both the speakers and the amplifier. They work best when the speakers are mounted to a structurally grounded frame. Protection devices should be replaced every five years or immediately after a significant lightning event.
 
Metal framing within the tower structure needs to be bonded to an earth grounding rod, and the bell frame should be adequately bonded to the structural ground. Air terminals (lightning rods or strike termination devices) should also be used and bonded to the main conductor leading to the grounding rod.
 
If your building does not have any protection (no matter how low of a profile it is), you should have a certified lightning expert check your structure for adequate lightning protection.
 
All conductors and bonding should be regularly inspected and maintained by a Lightning Professional. Degradation of the grounding electrode over time by moisture and soil conditions is not something that can be visually checked, a high potential dielectric test set must be used. Any changes to the structure after installation of the protection system should be followed up with inspections of the modifications and an update to the protection system.
 
== Expert advice ==
 
You can find more information on lightning protection from the following web resources.
 
* [http://lightning.org Lightning.org - The Lightning Protection Institute]
** [http://lightning.org/?s=ground+inspection&submit=Go Importance of inspections]
** [http://lightning.org/?s=ground+inspection&submit=Go Importance of inspections]
** [http://lightning.org/find-an-installer/ Locate a certified Lightning Professional near you]
** [http://lightning.org/find-an-installer/ Locate a certified Lightning Professional near you]
** Lightning protection for churches ([http://lightning.org/wp-content/uploads/2014/11/Church_Brochure.pdf PDF download])
* [http://www.nfpa.org National Fire Protection Association]
** [http://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=780 NFPA 780 Standard for the Installation of Lightning Protection Systems]
* [http://www.electrical-installation.org/enwiki/Main_Page Electrical Installation Wiki (Schneider Electric)]
** [http://www.electrical-installation.org/enwiki/General_rules_of_lightning_protection General rules of lightning protection]
** [http://www.electrical-installation.org/enwiki/Building_protection_system Building protection system]
** [http://www.electrical-installation.org/enwiki/Lightning_protection_-_Electrical_installation_protection_system Lightning protection - Electrical installation protection system]
** [http://www.electrical-installation.org/enwiki/Lightning_protection_standards Lightning protection standards]
** [http://www.electrical-installation.org/enwiki/The_Surge_Protection_Device_(SPD) The Surge Protection Device (SPD)]
** [http://www.electrical-installation.org/enwiki/Installation_and_measurements_of_earth_electrodes#Measurement_of_the_earth-electrode_resistance Measurement of the earth-electrode resistance]
* [https://en.wikipedia.org Wikipedia]
** [https://en.wikipedia.org/wiki/Lightning Lightning]
** [https://en.wikipedia.org/wiki/Lightning_rod#Risk_assessment Lightning rod - Risk assessment]
** [https://en.wikipedia.org/wiki/Lightning_strike#Prevention_and_mitigations Lightning strike - Prevention and mitigations]
[[Category:Electrical]]
[[Category:Installation]]

Latest revision as of 15:53, 30 July 2019


Risk

Lightning is responsible for over a billion dollars in property damage every year, according to Underwriters Laboratories (UL). Lightning risk is a function of the area of a structure, the height and the number of strikes per year per square mile for the region. Churches are usually the tallest structure in a given area. In addition, a church may also have a bell tower or tall spire that can double the structure's height. This has given rise to the adage, "Churches attract more lightning than sinners."

Lightning damage is uncommon to Chime Master installations, but it can occur to any electronic device. We suggest that you unplug all connections, not only power, to all electronic products before major storms, especially if you are concerned about it or if you live in an area with frequent and/or severe electrical storms. As with any valuable equipment purchase, you should review your insurance policy to be sure that your bell ringing equipment is covered for fire, theft, vandalism or damage due to electrical storms.

Causes

Bell ringing equipment damage usually comes in on the AC power line. Our current products rarely suffer lightning damage of this type, except for an occasional blown fuse. Other voltage spikes electromagnetically coupled into the speaker line typically go no farther than the amplifier and the speaker drivers themselves. Speaker wiring should be routed on the opposite corner of the tower from the lightning and structural ground conductors. Long parallel wire runs essentially become a large transformer that can couple damaging spike currents from one to the other.

Bells hung on improperly grounded frames can receive high static charges that can dissipate through the electric ground wires. The purpose of electrical grounding conductors are to prevent shock hazards and they should never be carriers of high potential atmospheric charges. The spikes they carry to the electrical system can cause damage beyond the ringing equipment into sensitive (and expensive) computers, AV equipment, phone systems and other musical instruments.

Minimizing risk

Chime Master can provide additional surge suppression components for both ends of the speaker line to minimize damage to drivers and amplifiers. These components require a suitable ground at both the speakers and the amplifier. They work best when the speakers are mounted to a structurally grounded frame. Protection devices should be replaced every five years or immediately after a significant lightning event.

Metal framing within the tower structure needs to be bonded to an earth grounding rod, and the bell frame should be adequately bonded to the structural ground. Air terminals (lightning rods or strike termination devices) should also be used and bonded to the main conductor leading to the grounding rod.

If your building does not have any protection (no matter how low of a profile it is), you should have a certified lightning expert check your structure for adequate lightning protection.

All conductors and bonding should be regularly inspected and maintained by a Lightning Professional. Degradation of the grounding electrode over time by moisture and soil conditions is not something that can be visually checked, a high potential dielectric test set must be used. Any changes to the structure after installation of the protection system should be followed up with inspections of the modifications and an update to the protection system.

Expert advice

You can find more information on lightning protection from the following web resources.