Keyboard size and MIDI setup menu: Difference between revisions

No edit summary
Line 1: Line 1:
<div style="font-size:84%">'''[[Chime_Master_Help|Help]] > [[Operating manuals]] '''</div>
<div style="font-size:84%">'''[[Chime_Master_Help|Help]] > [[Operating manuals]] '''</div>
The Keyboard size/MIDI setup utilizes an automatic connection menu that listens to keys from your keyboard and automatically connects their channels and transposition to the carillon.


== Opening the Menu ==
== Opening the Menu ==
Line 8: Line 10:


  Keyboard/MIDI Setup
  Keyboard/MIDI Setup
  Press '''9''' to continue.
  Press ''9'' to continue.


You should press '''9''' to continue
You may press ''9'' to continue, or press ''Cancel'' to close the menu without changes.
 
Be sure that the organ's MIDI stops are engaged, before running the Setup/Configure Keyboard procedure.


== Setting the Keyboard ==
== Setting the Keyboard ==
Line 21: Line 21:


=== Full keyboard ===
=== Full keyboard ===
# Depress the highest note on the primary keyboard (the melody keyboard for multiple keyboard consoles).  The display should show both the note and the MIDI channel it was transmitted on.
# Depress the lowest note on the primary keyboard.
# Depress the highest note on the secondary keyboard (If available or repeat with the single keyboard again).  This will play the accompaniment bell voices for Chime and Harp arrangements.
# Depress the lowest note on the secondary keyboard (or repeat the single keyboard if unavailable).


=== Transposing ===
Play highest note of
  primary keyboard


While each organ key is held down, the display will show both the note number and the MIDI channel it was transmitted on.


# Depress and release the highest note on the primary keyboard (the melody keyboard for multiple keyboard consoles).  Release the note.
# Depress and release the lowest note on the primary keyboard.
# Depress and release the highest note on the secondary keyboard (If available or repeat with the single keyboard again).  This will play the accompaniment bell voices for Chime and Harp arrangements.
# Depress and release the lowest note on the secondary keyboard (or repeat the single keyboard if unavailable).


=== Keyboard touch ===
== Closing the Menu ==


== Closing the Menu ==
The menu will automatically close and launch the [[Record performance menu|Record a Performance]] menu in the rehearsal mode so you can test your keyboard response. To exit, press ''Cancel'' until the current date and time is displayed.
 
== Also see ==


When you are finished using the Play selections menu, press the red ''Cancel'' button until you see the current date and time on the display.
* [[Chime tuning setup menu|Tuning the bells]] to your organ
* Setting [[Keyboard sensitivity setup menu|touch sensitivity]] and loudness of the keyboard
* Information about [[Midi|MIDI]] including how the carillon responds to different organs


[[category:manual]]
[[category:manual]]

Revision as of 22:13, 4 January 2017

The Keyboard size/MIDI setup utilizes an automatic connection menu that listens to keys from your keyboard and automatically connects their channels and transposition to the carillon.

Opening the Menu

Open the System Setup Menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display. Press the number 3 and the flashing lower line will read System Setup Menu then press the Enter button again. Press the number 7 and the flashing lower line will read Keyboard Size/MIDI then press the Enter button again.

Something similar to the following screen will appear (the blinking cursor position is shown in bold).

Keyboard/MIDI Setup
Press 9 to continue.

You may press 9 to continue, or press Cancel to close the menu without changes.

Setting the Keyboard

The default setting is the Chime Master 61 note (five-octave single keyboard). The system will default to this setting if this process is not completed in 2 minutes.

You must engage the organ's MIDI stops before proceeding or the bells will respond to the organ when the stops are not engaged.

Full keyboard

Play highest note of
  primary keyboard

While each organ key is held down, the display will show both the note number and the MIDI channel it was transmitted on.

  1. Depress and release the highest note on the primary keyboard (the melody keyboard for multiple keyboard consoles). Release the note.
  2. Depress and release the lowest note on the primary keyboard.
  3. Depress and release the highest note on the secondary keyboard (If available or repeat with the single keyboard again). This will play the accompaniment bell voices for Chime and Harp arrangements.
  4. Depress and release the lowest note on the secondary keyboard (or repeat the single keyboard if unavailable).

Closing the Menu

The menu will automatically close and launch the Record a Performance menu in the rehearsal mode so you can test your keyboard response. To exit, press Cancel until the current date and time is displayed.

Also see