Tap Schedule on the Home screen then Angelus.

Each time you enter this screen, the current Angelus schedule will be displayed. If no Angelus has been scheduled, ALL will be highlighted and no times will be displayed. If you would like to modify the current schedule or patterns in the Times table, tap the red Delete current Angelus button.

When you are finished adding times to ring the Angelus, tap the gray save button at the bottom right of the screen. You may exit this screen without saving changes by tapping the home button.

Select Pattern

The default pattern will appear in the top Angelus Pattern window. Tap this window to see the complete list of Angelus patterns available. The naming convention is:

  • 3-3-3 - the traditional three sets of three tolls with a pause between sets
  • 3-3-3-9 - as above, but followed by nine tolls of the same stationary bell
  • 3-3-3 (time) - instead followed by a swinging bell of duration as indicated

Optional Pattern

If you select the 3-3-3 only pattern, you can follow it with another swinging bell size or peal combination not listed in the factory supplied combination patterns.

De Profundis

You may also elect to play a De Profundis (ignitegium) at 9 PM by checking the box on this page. This will schedule a slow nine count toller every day at 9 PM.

Add the pattern to times

Tap the orange + button to add times for the selected day to play. Set the clock to the times (typically 2 or three per day) you would like to ring. Close the clock by tapping done, each time and the time is added to the list.

ALL

When ALL is selected, all 7 days will be edited. Select a day to edit the times by itself. Once any day is different, ALL cannot be selected without clearing the Angelus and starting again.

Save

Tapping the save button at the bottom right of the screen will add the selected times to your schedule.