Open the Record menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display. Press any gray cursor button until the flashing lower line reads Record a Performance then press the Enter button again.
Notice that the green Outside light is off, indicating that the tower speakers are not on. The current voice selection will be displayed across the top line. Remote function buttons 1-3 control the record menu functions.
Something similar to the following screen will appear.
Concert Chime & Harp Recd Play Save Voice
Notice that the green Outside light is off, indicating that the tower speakers are not on. The current voice selection will be displayed across the top line. Remote function buttons 1-3 control the record menu functions.
practice mode
change the bell voice
Pressing 4 on the front panel (F4) will cycle through the available bell voices. The last voice selected will be remembered. Platinum systems can be programmed to simplify this list of voices using the Voice Preference Setup screen.
recording a selection
playback recording
save selection
exiting Keyboard mode =
When you are finished you may end the performance by pressing the red Cancel button until you see the current date and time on the display. The system will cancel itself an hour after the last note has been played.