View-edit schedule menu: Difference between revisions

Line 21:

=== Add or modify an event selection ===

If the selection is zero already or you want to change it, simply key over the old selection with the new code. Refer to the listings of [[Macro code reference|functional macro codes]] for random music selections or the [[Media:11555-MillenniumPlatinum-Music.pdf|music and bell ringing catalog (PDF)]] for specific selection codes available.

If you wish to begin ringing some time after the quarter-hour displayed, you can enter a pause for up to eight minutes. Press the cursor up button twice until '''Pau_''' is displayed, then enter a number from 1 to 8. Follow the pause with the ringing event selection code.

Before you have completed entering all four digits of a selection, the cursor left button will backspace for corrections, and the red ''Cancel'' button will clear the selection so you can start over.

==== Online title lookup ====

Press the cursor down button while the selection selection field is blinking to obtain an online listing of most ringing codes. Depending on your system, as many as three different types of music or ringing will be available. Press the green ''Enter'' button to select the listing to browse, then use the cursor buttons to select the alphabetical entry point to the listing and press ''Enter'' again. You may now cursor up and down through the list to find your desired selection.

When you select the title of the selection with the green ''Enter'' button, the code for the selected title will be entered in the schedule.

==== Modify the audio level ====

While you are in the editing mode (selection blinking on the lower line), you can cursor left or right until the '''L6''' (or other current level setting) is blinking. Press a number from '''1''' (quietest) to '''8''' (loudest) to set the outside volume level for the selected time-slot.

==== Modify the time strike setting ====

While you are in the editing mode (selection blinking on the lower line or on the level field), you can cursor left or right until the upper right field is blinking. Press the cursor down button to turn time striking off for the selected time-slot. Press the cursor button up to toggle between Chiming and Striking modes for the selected time-slot.

'''Stk''' will signal each quarter hour without playing a chime melody, and '''Chm''' will signal each quarter with the chime melody. The hour will always ring at the top of the hour, but the quarters will ring with a single stroke when '''Stk''' is selected.

=== Save or cancel your edits ===

When you have finished making changes to the time-slot, press the green ''Enter'' button to save your changes, or press the red ''Cancel'' button to revert the time-slot back to its original program.

==== Selection carry forward feature ====

When you save a time-slot, the system will remember what you programmed in it so that you can cursor to subsequent days to program them to ring the same program. Best use of the feature is made by going to the time you want to program, then moving the cursor to the day before going into the edit mode for each day's time-slot.

If you want to change the program for the next time-slot, to the program that carries forward, press ''Cancel'' then ''Enter'' again to erase the carry forward program.

== Exit the View/Edit Schedule menu ==

After you have finished reviewing and editing the weekly schedule, press the red ''Cancel'' button while the cursor is on the top line of the display.

[[category:manual]]

@@ Line 21: / Line 21: @@
 === Add or modify an event selection ===
 If the selection is zero already or you want to change it, simply key over the old selection with the new code. Refer to the listings of [[Macro code reference|functional macro codes]] for random music selections or the [[Media:11555-MillenniumPlatinum-Music.pdf|music and bell ringing catalog (PDF)]] for specific selection codes available.
 If you wish to begin ringing some time after the quarter-hour displayed, you can enter a pause for up to eight minutes. Press the cursor up button twice until '''Pau_''' is displayed, then enter a number from 1 to 8. Follow the pause with the ringing event selection code.
+Before you have completed entering all four digits of a selection, the cursor left button will backspace for corrections, and the red ''Cancel'' button will clear the selection so you can start over.
+==== Online title lookup ====
+Press the cursor down button while the selection selection field is blinking to obtain an online listing of most ringing codes. Depending on your system, as many as three different types of music or ringing will be available. Press the green ''Enter'' button to select the listing to browse, then use the cursor buttons to select the alphabetical entry point to the listing and press ''Enter'' again. You may now cursor up and down through the list to find your desired selection.
+When you select the title of the selection with the green ''Enter'' button, the code for the selected title will be entered in the schedule.
+==== Modify the audio level ====
+While you are in the editing mode (selection blinking on the lower line), you can cursor left or right until the '''L6''' (or other current level setting) is blinking. Press a number from '''1''' (quietest) to '''8''' (loudest) to set the outside volume level for the selected time-slot.
+==== Modify the time strike setting ====
+While you are in the editing mode (selection blinking on the lower line or on the level field), you can cursor left or right until the upper right field is blinking. Press the cursor down button to turn time striking off for the selected time-slot. Press the cursor button up to toggle between Chiming and Striking modes for the selected time-slot.
+'''Stk''' will signal each quarter hour without playing a chime melody, and '''Chm''' will signal each quarter with the chime melody. The hour will always ring at the top of the hour, but the quarters will ring with a single stroke when '''Stk''' is selected.
 === Save or cancel your edits ===
+When you have finished making changes to the time-slot, press the green ''Enter'' button to save your changes, or press the red ''Cancel'' button to revert the time-slot back to its original program.
+==== Selection carry forward feature ====
+When you save a time-slot, the system will remember what you programmed in it so that you can cursor to subsequent days to program them to ring the same program. Best use of the feature is made by going to the time you want to program, then moving the cursor to the day before going into the edit mode for each day's time-slot.
+If you want to change the program for the next time-slot, to the program that carries forward, press ''Cancel'' then ''Enter'' again to erase the carry forward program.
+== Exit the View/Edit Schedule menu ==
+After you have finished reviewing and editing the weekly schedule, press the red ''Cancel'' button while the cursor is on the top line of the display.
 [[category:manual]]