Network setup AX: Difference between revisions
Jodivandyke (talk | contribs) |
Jodivandyke (talk | contribs) |
||
| Line 14: | Line 14: | ||
* Connect an Ethernet cable from your router to the labeled jack on the back of the AX carillon. This will be recognized immediately. | * Connect an Ethernet cable from your router to the labeled jack on the back of the AX carillon. This will be recognized immediately. | ||
* When a network address is displayed next to ''Ethernet IP'' you are connected | * When a network address is displayed next to ''Ethernet IP'' you are connected. | ||
** Make sure the Access point switch at lower left is '''Off and gray in color'''. If you change the Access Point mode the system must be restarted (see below). | ** Make sure the Access point switch at lower left is '''Off and gray in color'''. If you change the Access Point mode the system must be restarted (see below). | ||