|
|
| Line 203: |
Line 203: |
| == Initial setup == | | == Initial setup == |
|
| |
|
| Creating new page for start to finish setup from installation of the Management Suite and addition of remote users to installation of mobile app and connection to the bell system host PC.
| | For a complete system setup tutorial see [[Remote_control_mobile_app_setup|Remote Control Mobile App Setup]]. |
| | |
| [[Remote_control_mobile_app_setup|Remote Control Mobile App Setup]] | |
| | |
| === On the host PC ===
| |
| | |
| The Church Bell Remote mobile app requires that you have a networked PC running Management Suite connected to the USB port of your bell system. You must complete the following on the host PC before setting up the mobile app on your phone or tablet.
| |
| | |
| # Download the Management Suite installation files from: [http://www.chimemaster.com/downloads/ www.chimemaster.com/downloads]
| |
| # Do not connect the bell system to the PC USB port until after you install the software.
| |
| # Disable third party antivirus programs on the PC during Management Suite installation.
| |
| # Plug the bell system into the USB port of the PC and wait for the drivers to load. You should get a progress window while drivers are installing. Do not start Management Suite until you see the message that the Millennium+ Carillon is ready to use.
| |
| # Set up the desktop icon to run Management Suite as an administrator (see below). Start Management Suite. You will be warned that the program wants to make changes to you computer.
| |
| # Test functionality of Management Suite by launching the local Remote Control screen on the PC. You should see a copy of the carillon front panel display. Close the Management Suite Remote Control window.
| |
| # Apply your license code to Management Suite and close the program.
| |
| # Set up the Windows firewall to allow incoming data from the remote control port (see below).
| |
| # Restart Management Suite. The splash screen should indicate that it is licensed to support the mobile apps.
| |
| # Open the [[Administration_MS#Mobile_App_Host|Administration]] program from the Management Suite menu. Enable the mobile app server and add a user. You should create a separate user for each mobile device. Remember the login credentials for each.
| |
| # Close the Administration program, and restart the Management Suite. It must be running in the main menu for the mobile app to connect to the bell system.
| |
|
| |
|
| ==== Run as administrator ==== | | ==== Run as administrator ==== |