Recording library MS: Difference between revisions

Line 7:

If the carillon is not currently performing in an automatic mode then clicking (or tapping) the Record Librarian button on the Management Suite menu will open the librarian screen. You can exit either by closing the window or tapping on the Go to Standby button.

The system will be in the active keyboard rehearsal mode when this menu is activated.

At the top of the screen is a copy of the carillon display. To the right of the display are two indicator lights. If your bell system is equipped with inside monitoring, you will generally see the Inside light only. If you wish to audition selections outside also, you can click the Outside light to enable the bells outside.

Below the display is a row of record 'transport' buttons. Click one of these buttons to record, playback (audition) and save the recording. After making a recording, the system can be returned to rehearsal mode by clicking the ''Keyboard On/Voice Select'' button. This button will also allow you to change the currently active bell voice (if available).

If you have made recordings, there will be a list of selections from 8000 to 9999 listed in the window with columns for each displaying the title, song type, and erased status.

@@ Line 7: / Line 7: @@
 If the carillon is not currently performing in an automatic mode then clicking (or tapping) the Record Librarian button on the Management Suite menu will open the librarian screen. You can exit either by closing the window or tapping on the Go to Standby button.
+The system will be in the active keyboard rehearsal mode when this menu is activated.
+At the top of the screen is a copy of the carillon display. To the right of the display are two indicator lights. If your bell system is equipped with inside monitoring, you will generally see the Inside light only. If you wish to audition selections outside also, you can click the Outside light to enable the bells outside.
+Below the display is a row of record 'transport' buttons. Click one of these buttons to record, playback (audition) and save the recording. After making a recording, the system can be returned to rehearsal mode by clicking the ''Keyboard On/Voice Select'' button. This button will also allow you to change the currently active bell voice (if available).
 If you have made recordings, there will be a list of selections from 8000 to 9999 listed in the window with columns for each displaying the title, song type, and erased status.