Remote control from anywhere: Difference between revisions

← Older edit Newer edit →

@@ Line 53: / Line 53: @@
 ==== Mobile Device ====
-Add a host to the Church Bell Remote app for the public internet address. Use the IP address you discovered in the search engine and port 6777. You will select this host when you disable WiFi on the phone because the router can only make the connection when you are getting public internet from your 4G/LTE provider. To use the WiFi to control the bells, select the host you originally set up using the internal static address of the Management Suite host PC.
+Add a host to the Church Bell Remote app Hosts setup menu for the public internet address. You may want to keep the WiFi host connection for troubleshooting. Use the public IP address you discovered in the search above and port 6777.
+You will select this host when you are away from the church. When you are at church, you can either disable WiFi on the phone and continue to use the public host connection, or enable WiFi on the phone and and select the WiFi host connection in the Hosts menu of the app. The public host connection does not work when you are connected to WiFi because the router only redirects access from outside the LAN.
+[[Category:Manual]]