Sound Packages: Difference between revisions
(in progress) |
|||
| Line 1: | Line 1: | ||
These are typical audio systems that are added to an electronic carillon unit to complete a system. The components offered may vary with time. Use this page for an accurate description of systems outlined in on our website and printed materials. Call us at 800.344.7464 if you receive a quotation that does not match a system listed below. | These are typical audio systems that are added to an electronic carillon unit to complete a system. The components offered may vary with time. Use this page for an accurate description of systems outlined in on our website and printed materials. Call us at 800.344.7464 if you receive a quotation that does not match a system listed below. | ||
In addition to these packages, we can customize a systems for you that provides: | |||
* directional control | |||
* sanctuary sound | |||
* remote amplifier installation | |||
* control and augmentation of tower bells and chimes | |||
* tower clocks | |||
Updated October 2016 | Updated October 2016 | ||
| Line 6: | Line 13: | ||
=== inSpire Ulitimate === | === inSpire Ulitimate === | ||
=== inSpire Ascent === | === inSpire Ascent === | ||
| Line 11: | Line 19: | ||
* Qty 1 inSpire DSP 1600W Amplifier | * Qty 1 inSpire DSP 1600W Amplifier | ||
** Custom engineered for each installation (tower survey not included) | ** Custom engineered for each installation (tower survey not included) | ||
*** Voicing for speaker | *** Voicing for speaker combination below | ||
*** Speaker protection programming | *** Speaker protection programming | ||
*** Time alignment | *** Time alignment compensation for speaker air columns and mounting position | ||
* Qty 4 Premium | * Qty 1 inSpire Twelve inch full-range horn | ||
* Qty | * Qty 4 Premium long throw mid-range horns | ||
** Qty 4 Premium horn drivers | |||
Electrician required to install three pairs of AWG 12 THHN in conduit from system location to the tower. | Electrician required to install three pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system). | ||
=== inSpire Fidelity === | === inSpire Fidelity === | ||
* Qty 1 inSpire DSP 1600W Amplifier | |||
** Custom engineered for each installation (tower survey not included) | |||
*** Voicing for speaker combination below | |||
*** Speaker protection programming | |||
*** Time alignment compensation for speaker air columns and mounting position | |||
* Qty 4 inSpire Eight inch full-range horns | |||
* Qty 4 Premium long throw mid-range horns | |||
** Qty 4 Premium horn drivers | |||
Electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting. | |||
=== inSpire Performance === | === inSpire Performance === | ||
* Qty 1 Premium Amplifier | |||
** Audio cable kit | |||
** Amplifier settings pre-configured | |||
* Qty 4 inSpire Eight inch full-range horns | |||
Electrician required to install two pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting. | |||
=== inSpire Premium === | === inSpire Premium === | ||
* Qty 1 inSpire DSP 1600W Amplifier | |||
** Custom engineered for each installation (tower survey not included) | |||
*** Voicing for speaker combination below | |||
*** Speaker protection programming | |||
*** Time alignment compensation for speaker air columns and mounting position | |||
* Qty 4 inSpire Twelve inch full-range horns | |||
* Qty 4 Premium long throw mid-range horns | |||
** Qty 4 Premium horn drivers | |||
Electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting. | |||
=== inSpire Professional === | === inSpire Professional === | ||
* Qty 2 inSpire DSP 1600W Amplifier | |||
** Custom engineered for each installation (tower survey not included) | |||
*** Voicing for speaker combination below | |||
*** Speaker protection programming | |||
*** Time alignment compensation for speaker air columns and mounting position | |||
* Qty 4 inSpire Twelve inch full-range horns | |||
* Qty 8 Premium long throw mid-range horns | |||
** Qty 8 Premium horn drivers | |||
Electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting. | |||
| Line 36: | Line 85: | ||
** Amplifier settings pre-configured | ** Amplifier settings pre-configured | ||
* Qty 4 Premium long throw Horns | * Qty 4 Premium long throw Horns | ||
* Qty 4 Premium horn drivers | ** Qty 4 Premium horn drivers | ||
* Installation kit (does not include optional roof peak speaker bracket) | * Installation kit (does not include optional roof peak speaker bracket) | ||
** Qty 1 Junction box and cover | ** Qty 1 Junction box and cover | ||
| Line 45: | Line 94: | ||
=== Outreach Standard === | === Outreach Standard === | ||
* Qty 1 Standard 370W Amplifier | |||
** Audio cable kit | |||
** Amplifier settings pre-configured | |||
* Qty 4 Standard long throw Horns | |||
** Qty 4 Standard horn drivers | |||
* Installation kit (does not include optional roof peak speaker bracket) | |||
** Qty 1 Junction box and cover | |||
** Qty 4 SJTO driver pigtails with fork terminals installed | |||
** Brass set-screw wire nut kit | |||
** Screw Driver | |||
* 250 feet AWG 14-2 SJTO wire | |||
=== Outreach Value === | |||
* Module 60W Amplifier built-in to carillon | |||
* Qty 2 Standard long throw Horns | |||
** Qty 2 Standard horn drivers | |||
* Installation kit (does not include optional roof peak speaker bracket) | |||
** Qty 1 Junction box and cover | |||
** Qty 2 SJTO driver pigtails with fork terminals installed | |||
** Brass set-screw wire nut kit | |||
** Screw Driver | |||
* 250 feet AWG 14-2 SJTO wire | |||
Revision as of 17:22, 28 October 2016
These are typical audio systems that are added to an electronic carillon unit to complete a system. The components offered may vary with time. Use this page for an accurate description of systems outlined in on our website and printed materials. Call us at 800.344.7464 if you receive a quotation that does not match a system listed below.
In addition to these packages, we can customize a systems for you that provides:
- directional control
- sanctuary sound
- remote amplifier installation
- control and augmentation of tower bells and chimes
- tower clocks
Updated October 2016
inSpire Full Range Audio Systems
inSpire Ulitimate
inSpire Ascent
- Qty 1 inSpire DSP 1600W Amplifier
- Custom engineered for each installation (tower survey not included)
- Voicing for speaker combination below
- Speaker protection programming
- Time alignment compensation for speaker air columns and mounting position
- Custom engineered for each installation (tower survey not included)
- Qty 1 inSpire Twelve inch full-range horn
- Qty 4 Premium long throw mid-range horns
- Qty 4 Premium horn drivers
Electrician required to install three pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. Optional bracketing may be needed to mount speakers on roof (not a typical location for this system).
inSpire Fidelity
- Qty 1 inSpire DSP 1600W Amplifier
- Custom engineered for each installation (tower survey not included)
- Voicing for speaker combination below
- Speaker protection programming
- Time alignment compensation for speaker air columns and mounting position
- Custom engineered for each installation (tower survey not included)
- Qty 4 inSpire Eight inch full-range horns
- Qty 4 Premium long throw mid-range horns
- Qty 4 Premium horn drivers
Electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.
inSpire Performance
- Qty 1 Premium Amplifier
- Audio cable kit
- Amplifier settings pre-configured
- Qty 4 inSpire Eight inch full-range horns
Electrician required to install two pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.
inSpire Premium
- Qty 1 inSpire DSP 1600W Amplifier
- Custom engineered for each installation (tower survey not included)
- Voicing for speaker combination below
- Speaker protection programming
- Time alignment compensation for speaker air columns and mounting position
- Custom engineered for each installation (tower survey not included)
- Qty 4 inSpire Twelve inch full-range horns
- Qty 4 Premium long throw mid-range horns
- Qty 4 Premium horn drivers
Electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.
inSpire Professional
- Qty 2 inSpire DSP 1600W Amplifier
- Custom engineered for each installation (tower survey not included)
- Voicing for speaker combination below
- Speaker protection programming
- Time alignment compensation for speaker air columns and mounting position
- Custom engineered for each installation (tower survey not included)
- Qty 4 inSpire Twelve inch full-range horns
- Qty 8 Premium long throw mid-range horns
- Qty 8 Premium horn drivers
Electrician required to install four pairs of AWG 12 THHN in conduit from system location to the tower or steeple junction boxes. This system is not available for roof top mounting.
Community Outreach
Outreach Premium
- Qty 1 Standard 370W Amplifier
- Audio cable kit
- Amplifier settings pre-configured
- Qty 4 Premium long throw Horns
- Qty 4 Premium horn drivers
- Installation kit (does not include optional roof peak speaker bracket)
- Qty 1 Junction box and cover
- Qty 4 SJTO driver pigtails with fork terminals installed
- Brass set-screw wire nut kit
- Screw Driver
- 250 feet AWG 14-2 SJTO wire
Outreach Standard
- Qty 1 Standard 370W Amplifier
- Audio cable kit
- Amplifier settings pre-configured
- Qty 4 Standard long throw Horns
- Qty 4 Standard horn drivers
- Installation kit (does not include optional roof peak speaker bracket)
- Qty 1 Junction box and cover
- Qty 4 SJTO driver pigtails with fork terminals installed
- Brass set-screw wire nut kit
- Screw Driver
- 250 feet AWG 14-2 SJTO wire
Outreach Value
- Module 60W Amplifier built-in to carillon
- Qty 2 Standard long throw Horns
- Qty 2 Standard horn drivers
- Installation kit (does not include optional roof peak speaker bracket)
- Qty 1 Junction box and cover
- Qty 2 SJTO driver pigtails with fork terminals installed
- Brass set-screw wire nut kit
- Screw Driver
- 250 feet AWG 14-2 SJTO wire