DA3862 Deagan Solid State Action: Difference between revisions
Elimination of extra mechanical noises |
m hookup and installation |
||
| Line 22: | Line 22: | ||
== Installation == | == Installation == | ||
[[File:Striker3861.jpg| | [[File:Striker3861.jpg|150px|frameless|right|Deagan 67 Hookup]] | ||
* Remove old relay from top of the Deagan 67 action. | * Remove old relay from top of the Deagan 67 action. | ||
** Optionally remove bottom contacts and actuating arm to reduce friction. | ** Optionally remove bottom contacts and actuating arm to reduce friction and noise. | ||
* Move coil return leads to positive terminal block (module coil outputs are negative) | * Move coil return leads to positive terminal block (module coil outputs are negative) | ||
* Move the head toward the chime. Replace the retraction cup with the new cup. Orient the cup so that the sensor cable exits the top. Tighten the cup bolt. | * Move the head toward the chime. Replace the retraction cup with the new cup. Orient the cup so that the sensor cable exits the top. Tighten the cup bolt. | ||