Premium Amplifier: Difference between revisions
(created from STD) |
(created) |
||
| Line 1: | Line 1: | ||
Made in the USA | Made in the USA for low impedance speakers. | ||
== Features == | == Features == | ||
*Power switching through control cable from carillon | |||
*Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers | |||
*Indicators | *Indicators | ||
**Power-on: Green LED | **Power-on: Green LED | ||
| Line 7: | Line 9: | ||
**Clip: Red LED (1 per channel) | **Clip: Red LED (1 per channel) | ||
*70V direct drive capability (no output transformer) | *70V direct drive capability (no output transformer) | ||
*Amplifier Protection | *Amplifier Protection | ||
**Short circuit | |||
**Open circuit | |||
**Thermal | |||
**Ultrasonic | |||
**RF | |||
*Load Protection | *Load Protection | ||
**On/off muting | **On/off muting | ||
** | **DC fault detection | ||
**Power supply shutdown | |||
*Rack mountable with chassis less than 16" (40.6 mm) deep | *Rack mountable with chassis less than 16" (40.6 mm) deep | ||
*1-dB recessed, detented gain controls for fast, accurate, and repeatable settings | *1-dB recessed, detented gain controls for fast, accurate, and repeatable settings | ||
| Line 19: | Line 27: | ||
== Specifications and Ratings == | == Specifications and Ratings == | ||
*Frequency Response: 20 Hz–20 kHz: | *Frequency Response: 20 Hz–20 kHz: 20 Hz–20 kHz, ±0.2 dB | ||
* | *Noise: -107 dB | ||
*Input Sensitivity into 8Ω: 1. | *Input Sensitivity into 8Ω: 1.23 Vrms | ||
*Max Voltage Gain: | *Max Voltage Gain: 32 dB | ||
*Output Circuitry:Class AB | *Output Circuitry: Class AB+B | ||
=== Output Power === | === Output Power === | ||
*300 W 8Ω, 20 Hz–20 kHz, Less than 0.1% THD | |||
* | *500 W 4Ω, 20 Hz–20 kHz, Less than 0.1% THD | ||
* | *1600 W 4Ω, 1 kHz, 1% THD (bridged mono mode) | ||
* | |||
=== Distortion === | === Distortion === | ||
*SMPTE-IM: < 0.02% | *SMPTE-IM: < 0.02% | ||
*THD 4Ω and 8Ω | *THD 4Ω and 8Ω | ||
**20 Hz–20 kHz: 10 dB below rated power: < 0. | **20 Hz–20 kHz: 10 dB below rated power: < 0.01% | ||
**1.0 kHz and below: full rated power: < 0. | **1.0 kHz and below: full rated power: < 0.01% | ||
=== Current Draw === | === Current Draw === | ||
(pink noise program) | (pink noise program) | ||
*Typical, 1/8 power 4Ω, 120 V: | *Typical, 1/8 power 4Ω, 120 V: 9.0 A | ||
*Severe, 1/3 power 4Ω, 120 V: | *Severe, 1/3 power 4Ω, 120 V: 13.3 A | ||
== Power Options == | == Power Options == | ||
| Line 54: | Line 61: | ||
*Height: 3.5" (8.9 cm) 2U rack spaces | *Height: 3.5" (8.9 cm) 2U rack spaces | ||
*Width: 19" (48.3 cm) rack mounting | *Width: 19" (48.3 cm) rack mounting | ||
*Depth: | *Depth: 14" (35.6 cm) to rear support ears | ||
*Weight: | *Weight: 21 lb (9.5 kg) | ||
*Shipping Weight: | *Shipping Weight: 27 lb (12.3 kg) | ||
Revision as of 21:42, 25 August 2015
Made in the USA for low impedance speakers.
Features
- Power switching through control cable from carillon
- Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
- Indicators
- Power-on: Green LED
- Signal: Green LED (1 per channel)
- Clip: Red LED (1 per channel)
- 70V direct drive capability (no output transformer)
- Amplifier Protection
- Short circuit
- Open circuit
- Thermal
- Ultrasonic
- RF
- Load Protection
- On/off muting
- DC fault detection
- Power supply shutdown
- Rack mountable with chassis less than 16" (40.6 mm) deep
- 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings
- Tamper-proof security cover for gain controls
- Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection
- Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool
Specifications and Ratings
- Frequency Response: 20 Hz–20 kHz: 20 Hz–20 kHz, ±0.2 dB
- Noise: -107 dB
- Input Sensitivity into 8Ω: 1.23 Vrms
- Max Voltage Gain: 32 dB
- Output Circuitry: Class AB+B
Output Power
- 300 W 8Ω, 20 Hz–20 kHz, Less than 0.1% THD
- 500 W 4Ω, 20 Hz–20 kHz, Less than 0.1% THD
- 1600 W 4Ω, 1 kHz, 1% THD (bridged mono mode)
Distortion
- SMPTE-IM: < 0.02%
- THD 4Ω and 8Ω
- 20 Hz–20 kHz: 10 dB below rated power: < 0.01%
- 1.0 kHz and below: full rated power: < 0.01%
Current Draw
(pink noise program)
- Typical, 1/8 power 4Ω, 120 V: 9.0 A
- Severe, 1/3 power 4Ω, 120 V: 13.3 A
Power Options
- 120 VAC 50-60 Hz
- 230 VAC 50-60 Hz
Certifications
- UL Listed
- CE
Physical
- Height: 3.5" (8.9 cm) 2U rack spaces
- Width: 19" (48.3 cm) rack mounting
- Depth: 14" (35.6 cm) to rear support ears
- Weight: 21 lb (9.5 kg)
- Shipping Weight: 27 lb (12.3 kg)