Remote AX: Difference between revisions

Line 12:

No app store download required!

This section assumes that both the bell system and your phone/tablet are connected to the Internet. If you have ~~used~~ [[Network_setup_AX#Access_Point_modes|Network Settings]] to enable the ringing system's Access Point mode [[Remote_AX#Access_Point|follow AP instructions below]].

This section assumes that both the bell system and your phone/tablet are connected to the Internet.

If you do not have Internet access, use [[Network_setup_AX#Access_Point_modes|Network Settings]] to enable the ringing system's Access Point mode, then [[Remote_AX#Access_Point|follow AP instructions below]].

=== Obtain a secure access QR code ===

Scroll down to and tap the Remote button on the system's touch screen. Enter the PIN code of the user for whom you are installing the remote. The displayed Quick Response (QR) code has the secure information needed to load the remote for the selected user. Scan the code with your phone or tablet to load the remote control page on your device.

If you are not able to get to the system to scan the code on the front screen, you can get the code when you log into Chime.Center and select Remote Code from the Settings menu. If the screen is on your computer, use your phone's camera to scan the code. If you log into Chime.Center on your phone, tap the ''Open remote in browser'' button.

=== Scanning the code ===

@@ Line 12: / Line 12: @@
 No app store download required!
-This section assumes that both the bell system and your phone/tablet are connected to the Internet. If you have used [[Network_setup_AX#Access_Point_modes|Network Settings]] to enable the ringing system's Access Point mode [[Remote_AX#Access_Point|follow AP instructions below]].
+This section assumes that both the bell system and your phone/tablet are connected to the Internet.
+If you do not have Internet access, use [[Network_setup_AX#Access_Point_modes|Network Settings]] to enable the ringing system's Access Point mode, then [[Remote_AX#Access_Point|follow AP instructions below]].
 === Obtain a secure access QR code ===
 Scroll down to and tap the Remote button on the system's touch screen. Enter the PIN code of the user for whom you are installing the remote. The displayed Quick Response (QR) code has the secure information needed to load the remote for the selected user. Scan the code with your phone or tablet to load the remote control page on your device.
+If you are not able to get to the system to scan the code on the front screen, you can get the code when you log into Chime.Center and select Remote Code from the Settings menu. If the screen is on your computer, use your phone's camera to scan the code. If you log into Chime.Center on your phone, tap the ''Open remote in browser'' button.
 === Scanning the code ===