Network setup AX: Difference between revisions

Line 22:

* Connect an Ethernet cable from your router to the labeled jack on the back of the AX carillon. This will be recognized immediately.

* When a network address is displayed with a green check mark next to ''Ethernet network Connected'' you are connected.

* Make sure the Access point switch at the bottom of the screen is '''~~Off~~ and gray in color~~'''~~. If you change the Access Point mode the system must be restarted (see below).

* Make sure the Access point switch at the bottom of the screen is '''Normal''' and gray in color. If you change the Access Point mode the system must be restarted (see below).

* If you also have a green check mark and IP address under WiFi Networks, you should unplug the antenna from the rear USB port.

Line 33:

[[File:Wifi.jpg|frameless|right|450px]]

* From the home page of the Millennium or Platinum AX, choose Settings then Network. This page displays if you are connected via an Ethernet cable or a wireless network.

* The Access Point Mode at the bottom of the screen should be set to '''~~Off - gray~~''' when connecting to a WiFi network.

* The Access Point Mode at the bottom of the screen should be set to '''Normal''' - gray when connecting to a WiFi network.

* Tap on '''WiFi Networks''' and choose the one you want to connect to. Enter the WiFi password in the next box and tap Connect. It may take a few minutes.

* If you have changed the Access Point mode, restart the system (see below).

@@ Line 22: / Line 22: @@
 * Connect an Ethernet cable from your router to the labeled jack on the back of the AX carillon. This will be recognized immediately.
 * When a network address is displayed with a green check mark next to ''Ethernet network Connected'' you are connected.
-* Make sure the Access point switch at the bottom of the screen is '''Off and gray in color'''. If you change the Access Point mode the system must be restarted (see below).
+* Make sure the Access point switch at the bottom of the screen is '''Normal''' and gray in color. If you change the Access Point mode the system must be restarted (see below).
 * If you also have a green check mark and IP address under WiFi Networks, you should unplug the antenna from the rear USB port.
@@ Line 33: / Line 33: @@
 [[File:Wifi.jpg|frameless|right|450px]]
 * From the home page of the Millennium or Platinum AX, choose Settings then Network. This page displays if you are connected via an Ethernet cable or a wireless network.
-* The Access Point Mode at the bottom of the screen should be set to '''Off - gray''' when connecting to a WiFi network.
+* The Access Point Mode at the bottom of the screen should be set to '''Normal''' - gray when connecting to a WiFi network.
 * Tap on '''WiFi Networks''' and choose the one you want to connect to. Enter the WiFi password in the next box and tap Connect. It may take a few minutes.
 * If you have changed the Access Point mode, restart the system (see below).