Network setup AX: Difference between revisions
| Line 30: | Line 30: | ||
[[File:Wifi.jpg|frameless|right|450px]] | [[File:Wifi.jpg|frameless|right|450px]] | ||
* From the home page of the Millennium or Platinum AX, choose Settings then Network. | * From the home page of the Millennium or Platinum AX, choose Settings then Network. This page displays if you are connected via an Ethernet cable or a wireless network. | ||
* The Access Point Mode at the | * The Access Point Mode at the bottom of the screen should be set to '''Off - gray''' when connecting to a WiFi network. | ||
* Tap | * Tap on '''WiFi Networks''' and choose the one you want to connect to. Enter the WiFi password in the next box and tap Connect. It may take a few minutes. | ||
* If you have changed the Access Point mode, restart the system (see below). | * If you have changed the Access Point mode, restart the system (see below). | ||
* When the unit has successfully connected, it should update the Current WiFi Network and Wireless IP address. | * When the unit has successfully connected, it should update the Current WiFi Network and Wireless IP address. | ||