Date and Time AX: Difference between revisions
No edit summary |
Manual time set on early systems. |
||
| Line 26: | Line 26: | ||
#Observe an accurate clock. When it shows the time you have set and the seconds are zero, tap the button at the bottom of the screen, '''Synchronize to :00 seconds'''. | #Observe an accurate clock. When it shows the time you have set and the seconds are zero, tap the button at the bottom of the screen, '''Synchronize to :00 seconds'''. | ||
#Tap the lower right Save button. The screen may go dark if you had to set the clock forward very far. Tap anywhere on the screen to resume. | #Tap the lower right Save button. The screen may go dark if you had to set the clock forward very far. Tap anywhere on the screen to resume. | ||
=== Early firmware manual settings === | |||
If you do not have an Internet connection and your firmware version is older than 1.4.12 (on Settings - About menu), use the following steps to set the time in the event that the system has been powered off long enough to lose the correct time. | |||
# In time set menu, tap button to manually set time then these steps | |||
# Tap the right arrow on the calendar to advance months until the arrow icon disappears. Do not tap where it was after it disappears. | |||
# Tap the date ''1'' on the last available month. | |||
# Set the time to the current time. The system will log you out and the screen will go blank. | |||
# Log in and repeat the last instructions until you get to the current date and time. | |||
[[Category:AX Manual]] | [[Category:AX Manual]] | ||