Network setup AX: Difference between revisions
Simultaneous use of the AP and wired connection discouraged |
|||
| Line 40: | Line 40: | ||
==== Enable Internet features ==== | ==== Enable Internet features ==== | ||
If the system has an Internet Connection (using a network cable) and the wireless antenna is plugged in and the Access Point is left on, Internet features such as clock synchronization are disabled. Always turn off the Access Point when using a wired connection. | |||
* From the home page, choose Settings then Network. At the top, you can view if you are connected via an Ethernet cable or a wireless network (network address beside the appropriate IP label). | * From the home page, choose Settings then Network. At the top, you can view if you are connected via an Ethernet cable or a wireless network (network address beside the appropriate IP label). | ||
* Tap the Access Point switch in the lower left corner of the screen. When the '''Access Point switch is gray''' with an x on it, Internet features are enabled (after restart). | * Tap the Access Point switch in the lower left corner of the screen. When the '''Access Point switch is gray''' with an x on it, Internet features are enabled (after restart). | ||
* Leave the WiFi antenna plugged in if you are not connecting using an Ethernet cable. | * Leave the WiFi antenna plugged in only if you are ''not'' connecting using an Ethernet cable. | ||
Restart the system as described below. When the system starts with the Access Point turned off, update, backup and other Chime Center remote features are enabled. | Restart the system as described below. When the system starts with the Access Point turned off, update, backup and other Chime Center remote features are enabled. | ||