Network setup AX: Difference between revisions
| Line 18: | Line 18: | ||
=== WiFi === | === WiFi === | ||
* From the home page of the Millennium or Platinum AX, choose Settings then Network. At the top, you can view if you are connected via an Ethernet cable or a wireless network. | * From the home page of the Millennium or Platinum AX, choose Settings then Network. At the top, you can view if you are connected via an Ethernet cable or a wireless network. | ||
* The Access Point Mode at the lower left corner of the screen should be set to Off when connecting to a WiFi network. | * The Access Point Mode at the lower left corner of the screen should be set to '''Off - gray''' when connecting to a WiFi network. | ||
* Tap the box under Current WiFi Network and choose the one you want to connect to. Enter the WiFi password in the next box and tap Connect. It may take a few minutes. | * Tap the box under Current WiFi Network and choose the one you want to connect to. Enter the WiFi password in the next box and tap Connect. It may take a few minutes. | ||
* When the unit has successfully connected, it should update the Current WiFi Network and Wireless IP | * If you have changed the Access Point mode, restart the system (see below). | ||
* When the unit has successfully connected, it should update the Current WiFi Network and Wireless IP address. | |||
=== Access Point modes === | === Access Point modes === | ||