Network setup AX: Difference between revisions
| Line 26: | Line 26: | ||
=== Access Point === | === Access Point === | ||
The AX line was designed to be connected to the | The AX line was designed to be connected to the Internet, but if none is available at your facility, you can still use the [[Remote_AX|remote control]]. | ||
* While the Chime Master AX carillon is powered off, plug in the included wireless antenna into the top right USB port on the back, then restart the unit. | * While the Chime Master AX carillon is powered off, plug in the included wireless antenna into the top right USB port on the back, then restart the unit. | ||
* From the home page, choose Settings then Network. At the top, you can view if you are connected via an Ethernet cable or a wireless network (network address beside the appropriate IP label). | * From the home page, choose Settings then Network. At the top, you can view if you are connected via an Ethernet cable or a wireless network (network address beside the appropriate IP label). | ||