InSpire audio connections: Difference between revisions

Line 29:

If the amplifier is capable and programmed to output to a 70 Volt line, 14 AWG wire can be used. Keep in mind that speakers designed for [[70V_Line_Speaker_Wiring#Disadvantages_of_70V_speakers|70 Volt lines]] have built-in transformers with their own insertion losses.

== inSpire ~~Outreach~~ ==

== inSpire AX audio systems ==

~~moving~~ to ~~[[Connect_inSpire_Ascent_AX|Connect~~ AX ~~Outreach and Ascent systems]]~~

=== DSP amplifier outputs ===

;Long throw horn outputs

:Each audio package includes a digital amplifier with DSP tuned to drive long-throw mid-high frequency horns. This is important because the realism available on the full range outputs of AX Virtual Bell Instruments may overload ordinary horn drivers.

~~This package includes a digital amplifier with DSP~~ tuned to ~~drive four~~ long-throw ~~mid-high frequency~~ horns. ~~Additional amplifier outputs are provided for~~

;Full-range speaker outputs

* Full-range tower speaker upgrade

:Audio packages that support full-range outputs are tuned to work either by themselves (inSpire Performance) or together with the long throw horns. The combination of equalization and level balancing provides not only speaker protection, but an authentic balanced carillon sound.

* Inside monitoring speaker

The ~~amplifier is factory programmed with the~~ same ~~parameters~~ as ~~the~~ Ascent ~~package below so use the~~ Ascent ~~hookup instructions~~.

;Subwoofer speaker outputs

:The high-end audio packages feature a tower subwoofer output that provides hum tones of large bells.

:Packages without a subwoofer can be configured to drive two inside monitoring speakers for stereo monitoring.

=== System specification and hookup pages ===

;inSpire Outreach AX

:[[Sound_Packages#inSpire.E2.84.A2_Outreach|Specification]]

:[[Connect_inSpire_Ascent_AX|Hookup]] (same instructions as Ascent)

;inSpire Ascent AX

:[[Sound_Packages#inSpire.E2.84.A2_Ascent|Specification]]

:[[Connect_inSpire_Ascent_AX|Hookup]]

;inSpire Performance AX

:[[Sound_Packages#inSpire.E2.84.A2_Performance|Specification]]

:[[Connect_inSpire_Performance_AX|Hookup]]

;inSpire Professional AX

:[[Sound_Packages#inSpire.E2.84.A2_Professional|Specification]]

:[[Connect_inSpire_Professional_AX|Hookup]]

;inSpire Ultimate AX

:[[Sound_Packages#inSpire.E2.84.A2_Ultimate|Specification]]

:[[Connect_inSpire_Ultimate_AX|Hookup]]

== inSpire Millennium audio systems ==

== inSpire Ascent ==

@@ Line 29: / Line 29: @@
 If the amplifier is capable and programmed to output to a 70 Volt line, 14 AWG wire can be used. Keep in mind that speakers designed for [[70V_Line_Speaker_Wiring#Disadvantages_of_70V_speakers|70 Volt lines]] have built-in transformers with their own insertion losses.
-== inSpire Outreach ==
+== inSpire AX audio systems ==
-moving to [[Connect_inSpire_Ascent_AX|Connect AX Outreach and Ascent systems]]
+=== DSP amplifier outputs ===
+;Long throw horn outputs
+:Each audio package includes a digital amplifier with DSP tuned to drive long-throw mid-high frequency horns. This is important because the realism available on the full range outputs of AX Virtual Bell Instruments may overload ordinary horn drivers.
-This package includes a digital amplifier with DSP tuned to drive four long-throw mid-high frequency horns. Additional amplifier outputs are provided for
+;Full-range speaker outputs
-* Full-range tower speaker upgrade
+:Audio packages that support full-range outputs are tuned to work either by themselves (inSpire Performance) or together with the long throw horns. The combination of equalization and level balancing provides not only speaker protection, but an authentic balanced carillon sound.
-* Inside monitoring speaker
-The amplifier is factory programmed with the same parameters as the Ascent package below so use the Ascent hookup instructions.
+;Subwoofer speaker outputs
+:The high-end audio packages feature a tower subwoofer output that provides hum tones of large bells.
+:Packages without a subwoofer can be configured to drive two inside monitoring speakers for stereo monitoring.
+=== System specification and hookup pages ===
+;inSpire Outreach AX
+:[[Sound_Packages#inSpire.E2.84.A2_Outreach|Specification]]
+:[[Connect_inSpire_Ascent_AX|Hookup]] (same instructions as Ascent)
+;inSpire Ascent AX
+:[[Sound_Packages#inSpire.E2.84.A2_Ascent|Specification]]
+:[[Connect_inSpire_Ascent_AX|Hookup]]
+;inSpire Performance AX
+:[[Sound_Packages#inSpire.E2.84.A2_Performance|Specification]]
+:[[Connect_inSpire_Performance_AX|Hookup]]
+;inSpire Professional AX
+:[[Sound_Packages#inSpire.E2.84.A2_Professional|Specification]]
+:[[Connect_inSpire_Professional_AX|Hookup]]
+;inSpire Ultimate AX
+:[[Sound_Packages#inSpire.E2.84.A2_Ultimate|Specification]]
+:[[Connect_inSpire_Ultimate_AX|Hookup]]
+== inSpire Millennium audio systems ==
 == inSpire Ascent ==