USB connections to bell systems: Difference between revisions

Line 55:

* Using the push switch, turn power on to the Silex and the single green power LED should appear solid. The WLAN LED will blink Orange or be solid green.

* Push the WPS button on your wireless router. Push and hold the push switch (power button) on the Silex until the WLAN LED blinks green.

** If it blinks red, there was a failure. Unplug the Silex and ~~start~~ again at the ~~asterisk~~.

** If it blinks red, there was a failure. Unplug the Silex and try again after cycling power on the Silex.

* Return to the Silex product page and click on DS-520AN Support in the Quick Links section of the page. From the support page you can [http://www.silexamerica.com/campaign/sx-virtual-link-downloads/ download SX-Virtual Link for Windows].

* Install SX-Virtual Link and run it. The CMS carillon should be shown as connected.

@@ Line 55: / Line 55: @@
 * Using the push switch, turn power on to the Silex and the single green power LED should appear solid. The WLAN LED will blink Orange or be solid green.
 * Push the WPS button on your wireless router. Push and hold the push switch (power button) on the Silex until the WLAN LED blinks green.
-** If it blinks red, there was a failure. Unplug the Silex and start again at the asterisk.
+** If it blinks red, there was a failure. Unplug the Silex and try again after cycling power on the Silex.
 * Return to the Silex product page and click on DS-520AN Support in the Quick Links section of the page. From the support page you can [http://www.silexamerica.com/campaign/sx-virtual-link-downloads/ download SX-Virtual Link for Windows].
 * Install SX-Virtual Link and run it. The CMS carillon should be shown as connected.