Keyboard size and MIDI setup menu: Difference between revisions
(bc) |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
<div style="font-size:84%">'''[[Chime_Master_Help|Help]] > [[Operating manuals]] '''</div> | <div style="font-size:84%">'''[http://www.ChimeMaster.com Home] > [[Chime_Master_Help|Help]] > [[Operating manuals]] > [[:Category:Legacy_Products|Previous Generation]] > [[Using_Millennium_carillon|22 Series]]'''</div> | ||
The Keyboard size/MIDI setup utilizes an automatic connection menu that listens to keys from your keyboard and automatically connects their channels and transposition to the carillon. | |||
== Opening the Menu == | == Opening the Menu == | ||
Open the System Setup Menu by pressing the front panel green ''Enter'' button so that you read ''Main Menu'' on the top line of the display. Press the number ''3'' and the flashing lower line will read ''System Setup Menu'' then press the ''Enter'' button again. Press the number ''7'' and the flashing lower line will read ''Keyboard Size/MIDI'' then press the ''Enter'' button again. | Open the System Setup Menu by pressing the front panel green ''Enter'' button so that you read ''Main Menu'' on the top line of the display. <br> | ||
Press the number ''3'' and the flashing lower line will read ''System Setup Menu'' then press the ''Enter'' button again. <br> | |||
Press the number ''7'' and the flashing lower line will read ''Keyboard Size/MIDI'' then press the ''Enter'' button again. | |||
Something similar to the following screen will appear (the blinking cursor position is shown in bold). | Something similar to the following screen will appear (the blinking cursor position is shown in bold). | ||
Keyboard/MIDI Setup | Keyboard/MIDI Setup | ||
Press | Press ''9'' to continue. | ||
You | You may press ''9'' to continue, or press ''Cancel'' to close the menu without changes. | ||
== Setting the Keyboard == | == Setting the Keyboard == | ||
| Line 21: | Line 23: | ||
=== Full keyboard === | === Full keyboard === | ||
Play highest note of | |||
primary keyboard | |||
While each organ key is held down, the display will show both the note number and the MIDI channel it was transmitted on. | |||
# Depress and release the highest note on the primary keyboard (the melody keyboard for multiple keyboard consoles). Release the note. | |||
# Depress and release the lowest note on the primary keyboard. | |||
# Depress and release the highest note on the secondary keyboard (If available or repeat with the single keyboard again. Bell controls do not recognize secondary keyboards). This will play the accompaniment bell voices for Chime and Harp arrangements. | |||
# Depress and release the lowest note on the secondary keyboard (or repeat the single keyboard if unavailable). | |||
== | == Closing the Menu == | ||
== | The menu will automatically close and launch the [[Record performance menu|Record a Performance]] menu in the rehearsal mode so you can test your keyboard response. To exit, press ''Cancel'' until the current date and time is displayed. | ||
== Also see == | |||
* [[Chime tuning setup menu|Tuning the bells]] to your organ | |||
* Setting [[Keyboard sensitivity setup menu|touch sensitivity]] and loudness of the keyboard | |||
* Information about [[Midi|MIDI]] including how the carillon responds to different organs | |||
[[category: | [[category:Legacy_Products]] | ||
Latest revision as of 16:47, 5 October 2023
The Keyboard size/MIDI setup utilizes an automatic connection menu that listens to keys from your keyboard and automatically connects their channels and transposition to the carillon.
Opening the Menu
Open the System Setup Menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display.
Press the number 3 and the flashing lower line will read System Setup Menu then press the Enter button again.
Press the number 7 and the flashing lower line will read Keyboard Size/MIDI then press the Enter button again.
Something similar to the following screen will appear (the blinking cursor position is shown in bold).
Keyboard/MIDI Setup Press 9 to continue.
You may press 9 to continue, or press Cancel to close the menu without changes.
Setting the Keyboard
The default setting is the Chime Master 61 note (five-octave single keyboard). The system will default to this setting if this process is not completed in 2 minutes.
You must engage the organ's MIDI stops before proceeding or the bells will respond to the organ when the stops are not engaged.
Full keyboard
Play highest note of primary keyboard
While each organ key is held down, the display will show both the note number and the MIDI channel it was transmitted on.
- Depress and release the highest note on the primary keyboard (the melody keyboard for multiple keyboard consoles). Release the note.
- Depress and release the lowest note on the primary keyboard.
- Depress and release the highest note on the secondary keyboard (If available or repeat with the single keyboard again. Bell controls do not recognize secondary keyboards). This will play the accompaniment bell voices for Chime and Harp arrangements.
- Depress and release the lowest note on the secondary keyboard (or repeat the single keyboard if unavailable).
Closing the Menu
The menu will automatically close and launch the Record a Performance menu in the rehearsal mode so you can test your keyboard response. To exit, press Cancel until the current date and time is displayed.
Also see
- Tuning the bells to your organ
- Setting touch sensitivity and loudness of the keyboard
- Information about MIDI including how the carillon responds to different organs