Record performance menu: Difference between revisions
(Created page with "=== Opening the menu === Open the Record menu by pressing the front panel green ''Enter'' button so that you read ''Main Menu'' on the top line of the display. Press any gray...") |
mNo edit summary |
||
| Line 18: | Line 18: | ||
===recording a selection=== | ===recording a selection=== | ||
While looking at the record menu select option '''1 (F1)''' The system will wait 15 seconds for you to begin playing. If you have an unsaved recording in the system, it ask you to replace or cancel. | |||
The recording will stop when you have not played for more than 15 seconds, press '''Cancel''' or any other menu button. | |||
===playback recording=== | ===playback recording=== | ||
While in the record menu pictured above, select function '''2''' ''Play'' to listen to your recording. The system will assign your recording the number 8000. | |||
===save selection=== | ===save selection=== | ||
From the record menu (displayed above) select function '''3''' ''Save'' (Press F3). The system will assign your selection a number starting with 8001 and increasing with each new saved recording. You can manage your records and add titles using the ''Recording Librarian''. | |||
==exiting Keyboard mode === | ==exiting Keyboard mode === | ||
Revision as of 19:49, 30 December 2016
Open the Record menu by pressing the front panel green Enter button so that you read Main Menu on the top line of the display. Press any gray cursor button until the flashing lower line reads Record a Performance then press the Enter button again.
Notice that the green Outside light is off, indicating that the tower speakers are not on. The current voice selection will be displayed across the top line. Remote function buttons 1-3 control the record menu functions.
Something similar to the following screen will appear.
Concert Chime & Harp Recd Play Save Voice
Notice that the green Outside light is off, indicating that the tower speakers are not on. The current voice selection will be displayed across the top line. Remote function buttons 1-3 control the record menu functions.
practice mode
change the bell voice
Pressing 4 on the front panel (F4) will cycle through the available bell voices. The last voice selected will be remembered. Platinum systems can be programmed to simplify this list of voices using the Voice Preference Setup screen.
recording a selection
While looking at the record menu select option 1 (F1) The system will wait 15 seconds for you to begin playing. If you have an unsaved recording in the system, it ask you to replace or cancel.
The recording will stop when you have not played for more than 15 seconds, press Cancel or any other menu button.
playback recording
While in the record menu pictured above, select function 2 Play to listen to your recording. The system will assign your recording the number 8000.
save selection
From the record menu (displayed above) select function 3 Save (Press F3). The system will assign your selection a number starting with 8001 and increasing with each new saved recording. You can manage your records and add titles using the Recording Librarian.
exiting Keyboard mode =
When you are finished you may end the performance by pressing the red Cancel button until you see the current date and time on the display. The system will cancel itself an hour after the last note has been played.